MAX1480AEPI+ vs MAX1480EAEPI+ 비교

다음의 상세 나란히 비교: MAX1480AEPI+ 제조: Analog Devices 및 MAX1480EAEPI+ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

사양 비교

파라미터 MAX1480AEPI+ MAX1480EAEPI+
브랜드 Analog Devices Analog Devices
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 활성
Product Type Isolated RS-485/RS-422 transceiver Isolated RS-485/RS-422 transceiver
Transmitter and Receiver Count 1 transmitter and 1 receiver —
Duplex Mode Half-duplex —
데이터 속도 250 kbps —
Supported Interfaces RS-485 and RS-422 —
공급 전압 +5 V on the logic side —
Isolation Architecture Electrically isolated —
패키지 28-pin PDIP, 0.600 inch, 15.24 mm 28-pin plastic DIP (28-PDIP)
장착 스타일 Through-hole —
Logic-Side Supply Architecture Single +5 V supply powers both sides of the interface —
Application Automated test equipment, HVAC and building-control networks, industrial control, local-area networks, and isolated EMI-sensitive data interfaces —
Manufacturer Family MAX1480A/B/C —
Available Package Configuration 28-pin DIP —
동작 온도 범위 [DATA_NEEDED: operating temperature range] 0°C to +70°C
Isolation Voltage Rating [DATA_NEEDED: isolation voltage rating] —
RoHS 상태 [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
Driver and Receiver Configuration — 1 driver and 1 receiver
Supply Voltage Range — 4.5 V to 5.5 V
ESD Protection — ±15 kV
Isolation — Single-side power isolation
Receiver Fail-Safe Circuit — Supported
Standby Mode — Low-power standby
Total Pin Count — 28 pins
실장 유형 — Through-hole
Supported Standards — RS-485 and RS-422
Logic and Bus Isolation — Electrically isolated
REACH Status — [DATA_NEEDED: REACH status]
Lead-Free Status — [DATA_NEEDED: lead-free status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청