MAX1480CCPI+ vs MAX1480BCPI+ 비교
다음의 상세 나란히 비교: MAX1480CCPI+ 제조: Maxim Integrated 및 MAX1480BCPI+ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Analog Devices
MAX1480BCPI+ - Isolated RS-485/RS-422 Transceiver, 28-PDIP | Analog Devices
MAX1480BCPI+ ✓ 활성사양 비교
| 파라미터 | MAX1480CCPI+ | MAX1480BCPI+ |
|---|---|---|
| 브랜드 | Maxim Integrated | Analog Devices |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Isolated RS-485/RS-422 transceiver | — |
| Driver and Receiver Configuration | 1 driver and 1 receiver | — |
| Duplex Mode | Half duplex | — |
| Maximum Data Rate | 250 kbps | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Isolation | Galvanically isolated logic-side and bus-side interfaces | — |
| Driver Slew Rate | Reduced slew rate | — |
| Supported Standards | RS-485 and RS-422 | — |
| 패키지 | 28-pin DIP, 0.600 in (15.24 mm) width | 28-PDIP (0.600", 15.24 mm wide) |
| 실장 유형 | Through-hole | Through-Hole |
| Logic-Side Supply | Single 5 V supply powers both sides of the interface | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | — |
| Isolation Voltage | [DATA_NEEDED: isolation withstand voltage] | 1000 Vrms (galvanic, transformer-based) |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| 대기 전류 | [DATA_NEEDED: quiescent current] | — |
| RoHS 상태 | unknown | Compliant |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| 데이터 속도 | — | 250 kbps |
| Receiver Hysteresis | — | 70 mV |
| Supply Voltage (Logic Side) | — | 5 V (single supply) |
| 동작 온도 | — | -40C to +85C |
| Number of Nodes on Bus | — | Up to 32 transceivers |
| Slew Rate | — | Reduced (low-EMI drivers) |
| Construction | — | Hybrid microcircuit (CMOS + pulse transformer) |
| Lead-Free / Halogen-Free | — | [DATA_NEEDED: lead-free / halogen-free status] |