MAX1480CEPI+ vs MAX1480BEPI+ 비교
다음의 상세 나란히 비교: MAX1480CEPI+ 제조: Analog Devices 및 MAX1480BEPI+ 제조: Maxim Integrated. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Analog Devices
MAX1480CEPI+ - Isolated RS-485/RS-422 Transceiver, 28-PDIP | Analog Devices
MAX1480CEPI+ ✓ 활성사양 비교
| 파라미터 | MAX1480CEPI+ | MAX1480BEPI+ |
|---|---|---|
| 브랜드 | Analog Devices | Maxim Integrated |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | 1/1 Transceiver Half (isolated RS-485/RS-422 interface) | Complete electrically isolated RS-485/RS-422 data interface |
| Supported Standards | RS-485, RS-422 | — |
| Isolation | Electrically isolated (hybrid microcircuit with isolation barrier) | Electrically isolated |
| Supply Architecture | Single +5 V supply on the logic side powers both sides of the interface | Single +5 V supply on logic side powers both sides |
| 패키지 | 28-PDIP (28-pin plastic DIP, through-hole) | 28-pin PDIP |
| 핀 수 | 28 | — |
| 실장 유형 | Through-hole | Through-hole |
| Package Code / Shape | DIP, rectangular | — |
| Temperature Grade | Industrial | — |
| Driver Configuration | Half-duplex, 1 driver / 1 receiver | — |
| Driver Slew Rate | Reduced-slew-rate drivers (MAX1480B/C feature) to minimize EMI | Reduced-slew-rate driver |
| Family Variants | MAX1480A / MAX1480B / MAX1480C share the 28-pin DIP package | — |
| Maximum Data Rate | [DATA_NEEDED: maximum signaling rate for MAX1480C variant] | — |
| Common-Mode Range | [DATA_NEEDED: bus-side common-mode voltage range] | — |
| Isolation Withstand Voltage | [DATA_NEEDED: isolation withstand voltage rating] | — |
| 동작 온도 범위 | [DATA_NEEDED: minimum and maximum junction/ambient operating temperature] | — |
| Logic Supply Voltage Range | [DATA_NEEDED: VCC operating range] | — |
| RoHS 상태 | unknown | — |
| Transceiver Configuration | — | 1 driver / 1 receiver |
| Duplex Mode | — | Half-duplex |
| Supported Protocols | — | RS-422 and RS-485 |
| 데이터 속도 | — | 250 kb/s |
| Receiver Hysteresis | — | 70 mV |
| 패키지 / 케이스 | — | 28-DIP (0.600 inch, 15.24 mm) |
| 동작 온도 | — | 0 °C to +70 °C |
| Application Category | — | EMI-sensitive isolated data interfaces |
| RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Isolation Voltage | — | [DATA_NEEDED: isolation voltage rating] |
| Common-Mode Voltage | — | [DATA_NEEDED: common-mode voltage rating] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |