MAX156BENG vs MAX128BENG 비교
다음의 상세 나란히 비교: MAX156BENG 제조: Maxim Integrated 및 MAX128BENG 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | MAX156BENG | MAX128BENG |
|---|---|---|
| 브랜드 | Maxim Integrated | Analog Devices |
| 카테고리 | ADC/DAC | ADC/DAC |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $7.45 | $9.20 |
| 분해능 | 8 bit | 12 bits |
| Number of Channels | 8 single-ended (4 differential) | 8 single-ended / 4 differential |
| Sample Rate | 250 ksps per channel (278 ksamples/sec aggregate per distributor data) | — |
| Converter Type | SAR (Successive Approximation) with simultaneous T/H | — |
| Analog Supply Voltage | 4.75 V to 5.25 V | — |
| Digital Supply Voltage | 4.75 V to 5.25 V | — |
| Analog Input Range | 0 V to +5 V (unipolar); +/-5 V (bipolar) | — |
| Internal Reference Voltage | 2.5 V | 4.096 V |
| Operating Current (typical) | 2.7 mA at 5 V | — |
| Power Dissipation (typical) | 13.5 mW at 5 V / 250 ksps | — |
| Operating Temperature (MAX156BENG) | 0 C to +70 C (Commercial) | — |
| Operating Temperature (MAX156BENG+) | -40 C to +85 C (Industrial) | — |
| 패키지 | 24-pin PDIP (DIP-24, 0.300 inch / 7.62 mm pitch) | 24-pin PDIP (DIP-24) |
| 실장 유형 | Through-Hole | Through-Hole (THT) |
| 인터페이스 | Parallel microprocessor-compatible | — |
| Track-and-Hold Architecture | Simultaneous T/H on all channels | — |
| RoHS 상태 | MAX156BENG: non-compliant (Pb); MAX156BENG+: compliant per LCSC | Compliant (G suffix - lead-free finish) |
| 샘플링 속도 | — | 8 ksps |
| ADC Architecture | — | SAR (Successive Approximation Register) |
| 공급 전압 | — | +5 V (single analog supply) |
| Input Voltage Ranges | — | 0 to 5V, 0 to 10V, ±5V, ±10V, 0 to 15V, ±15V |
| Digital Interface | — | 2-wire I2C-compatible (SDA, SCL) |
| Shutdown Modes | — | Hardware SHDN + software standby + full power-down |
| I2C Address Select | — | AD0 pin (0x50 or 0x52) |
| 동작 온도 | — | -40C to +85C (E suffix) |
| Data Interface | — | I2C serial, up to 8 devices per bus |