MAX156BENG vs MAX164BCNG 비교
다음의 상세 나란히 비교: MAX156BENG 제조: Maxim Integrated 및 MAX164BCNG 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | MAX156BENG | MAX164BCNG |
|---|---|---|
| 브랜드 | Maxim Integrated | Analog Devices |
| 카테고리 | ADC/DAC | ADC/DAC |
| 수명 주기 상태 | 활성 | NRND |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $7.45 | $13.25 |
| 분해능 | 8 bit | 12 bit |
| Number of Channels | 8 single-ended (4 differential) | 1 |
| Sample Rate | 250 ksps per channel (278 ksamples/sec aggregate per distributor data) | — |
| Converter Type | SAR (Successive Approximation) with simultaneous T/H | — |
| Analog Supply Voltage | 4.75 V to 5.25 V | — |
| Digital Supply Voltage | 4.75 V to 5.25 V | — |
| Analog Input Range | 0 V to +5 V (unipolar); +/-5 V (bipolar) | 0 V to +5 V unipolar; ±5 V bipolar with external resistors |
| Internal Reference Voltage | 2.5 V | — |
| Operating Current (typical) | 2.7 mA at 5 V | — |
| Power Dissipation (typical) | 13.5 mW at 5 V / 250 ksps | — |
| Operating Temperature (MAX156BENG) | 0 C to +70 C (Commercial) | — |
| Operating Temperature (MAX156BENG+) | -40 C to +85 C (Industrial) | — |
| 패키지 | 24-pin PDIP (DIP-24, 0.300 inch / 7.62 mm pitch) | PDIP-24 (through-hole, 0.300 inch row spacing) |
| 실장 유형 | Through-Hole | Through-Hole |
| 인터페이스 | Parallel microprocessor-compatible | — |
| Track-and-Hold Architecture | Simultaneous T/H on all channels | — |
| RoHS 상태 | MAX156BENG: non-compliant (Pb); MAX156BENG+: compliant per LCSC | — |
| Conversion Rate | — | 100 ksps |
| Architecture | — | SAR (Successive Approximation) with Track-and-Hold |
| Supply Voltage (Analog V+) | — | +5 V nominal |
| Supply Voltage (Digital VDD) | — | +5 V nominal |
| Reference | — | Internal 5.0 V buried-zener, ±1.5% initial accuracy |
| Data Interface | — | Parallel, microprocessor-compatible (8/16-bit bus) |
| Integral Nonlinearity (INL) | — | ±1/2 LSB (typ) |
| Power Dissipation | — | [DATA_NEEDED: full-load power dissipation in mW] |
| 셧다운 전류 | — | less than 100 µA (hardware PD pin) |
| 동작 온도 | — | 0 °C to +70 °C (C grade, commercial) |
| Temperature Grade | — | COMMERCIAL |
| Terminal Form | — | THROUGH-HOLE |
| Lead Finish / RoHS | — | SnPb or Pb-free variant available; see ordering info |