MAX166AEPP+ vs MAX166BEPP 비교
다음의 상세 나란히 비교: MAX166AEPP+ 제조: Maxim Integrated 및 MAX166BEPP 제조: Maxim Integrated. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Maxim Integrated
MAX166BEPP - 5µs 8-Bit µP-Compatible ADC with T/H | Maxim Integrated
MAX166BEPP Obsolete사양 비교
| 파라미터 | MAX166AEPP+ | MAX166BEPP |
|---|---|---|
| 브랜드 | Maxim Integrated | Maxim Integrated |
| 카테고리 | ADC/DAC | ADC/DAC |
| 수명 주기 상태 | NRND | Obsolete |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $5.30 | $8.69 |
| 분해능 | 8 bit | 8 bit |
| Architecture | Successive Approximation (SAR) with Track/Hold | SAR (Successive Approximation Register) |
| 샘플링 속도 | 200 ksps (max) | — |
| Conversion Time | 5 µs (max) | 5 us (typical) |
| Number of Channels | 1 | 1 |
| 입력 전압 범위 | 0 V to +5 V (unipolar); ±5 V (bipolar mode) | [DATA_NEEDED: input range unipolar/bipolar] |
| 공급 전압 | +5 V (±5%) | +5 V (single supply) |
| Internal Reference Voltage | +2.46 V | — |
| Reference Accuracy | ±1.5% | — |
| Total Unadjusted Error (TUE) | ±1 LSB (max) | — |
| Analog Input Bandwidth | Up to 50 kHz full-scale (386 mV/µs slew) | — |
| Data Interface | Parallel, 8-bit, three-state latched outputs | Parallel (uP-compatible) |
| Logic Compatibility | CMOS-/TTL-compatible I/O | — |
| 패키지 | PDIP-20 (0.300 inch, through-hole) | 20-pin PDIP (EPP) |
| Operating Temperature Grade | Industrial (E suffix) | — |
| RoHS 상태 | unknown | unknown |
| Number of ADCs | — | 1 |
| Sampling Type | — | Successive Approximation with Track/Hold |
| Input Signal Bandwidth | — | 50 kHz |
| Input Slew Rate | — | 386 mV/us |
| Internal Reference | — | Yes (on-chip voltage reference) |
| Power Dissipation | — | [DATA_NEEDED: power dissipation, exact mW] |
| 동작 온도 | — | Industrial grade (per "B" suffix) |
| 실장 유형 | — | Through-Hole |
| 핀 수 | — | 20 |