MAX190BCWG+T vs MAX198ACNI 비교

다음의 상세 나란히 비교: MAX190BCWG+T 제조: Maxim Integrated 및 MAX198ACNI 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Maxim Integrated
MAX190BCWG+T MAX190BCWG+T - 12-Bit 75ksps SAR ADC w/ Ref | Maxim Integrated

MAX190BCWG+T - 12-Bit 75ksps SAR ADC w/ Ref | Maxim Integrated

MAX190BCWG+T ✓ 활성

사양 비교

파라미터 MAX190BCWG+T MAX198ACNI
브랜드 Maxim Integrated Analog Devices
카테고리 ADC/DAC ADC/DAC
수명 주기 상태 활성 Obsolete
재고 상태 In Stock In Stock
단가 (USD) $6.15 $9.80
분해능 12 bits 12 bit
샘플링 속도 75 ksps (max) 100 ksps
Architecture SAR (Successive Approximation) SAR (Successive Approximation Register)
Number of Channels 1 6 single-ended or 3 differential
Analog Supply Voltage 4.75 V to 5.25 V (single +5 V) —
Digital Supply Voltage Same as AVDD or separate +5 V —
Internal Reference 2.5 V (precision buried-zener) —
입력 전압 범위 0 to +5 V unipolar; ±5 V, ±VREF bipolar (software-selected) —
Integral Nonlinearity (INL) ±0.5 LSB (max, B-grade) —
Offset Error ±2 LSB (max) —
Gain Error ±2 LSB (max) —
SINAD 70 dB (typ) —
Active Supply Current 1.0 mA (typ, AVDD) —
셧다운 전류 2 µA (typ) —
Digital Interface Serial (SPI/QSPI/MICROWIRE) or 8-bit parallel Parallel, 8/16-bit bus compatible, three-state I/O
패키지 24-pin wide-body SOIC (W) 28-pin PDIP (N)
동작 온도 0 °C to +70 °C (commercial) —
Reference Capacitor 4.7 µF external on REF pin —
실장 유형 Surface Mount Through-Hole (THT)
RoHS 상태 Compliant [DATA_NEEDED: RoHS status of the bare CNI suffix]
Manufacturer — Analog Devices (formerly Maxim Integrated)
Product Type — Data Acquisition System (DAS) / Multi-Channel SAR ADC
공급 전압 — +5 V single supply
Analog Input Range (MAX198) — 0 to 10 V / 0 to 5 V / ±10 V / ±5 V / 0 to 4 V / ±4 V (software programmable)
Logic Compatibility — TTL/CMOS
Internal Reference Voltage — 4.096 V
Integral Non-Linearity (INL) — ±0.5 LSB (A grade)
Power Dissipation (active) — 60 mW typical
Power Dissipation (power-down) — < 1 mW
동작 온도 범위 — 0 °C to +70 °C (C suffix, commercial)
MSL 레벨 — 1 (unlimited)

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청