MAX198ACNI vs MAX190BCWG+T 비교

다음의 상세 나란히 비교: MAX198ACNI 제조: Analog Devices 및 MAX190BCWG+T 제조: Maxim Integrated. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Maxim Integrated
MAX190BCWG+T MAX190BCWG+T - 12-Bit 75ksps SAR ADC w/ Ref | Maxim Integrated

MAX190BCWG+T - 12-Bit 75ksps SAR ADC w/ Ref | Maxim Integrated

MAX190BCWG+T ✓ 활성

사양 비교

파라미터 MAX198ACNI MAX190BCWG+T
브랜드 Analog Devices Maxim Integrated
카테고리 ADC/DAC ADC/DAC
수명 주기 상태 Obsolete 활성
재고 상태 In Stock In Stock
단가 (USD) $9.80 $6.15
Manufacturer Analog Devices (formerly Maxim Integrated) —
Product Type Data Acquisition System (DAS) / Multi-Channel SAR ADC —
분해능 12 bit 12 bits
Number of Channels 6 single-ended or 3 differential 1
샘플링 속도 100 ksps 75 ksps (max)
Architecture SAR (Successive Approximation Register) SAR (Successive Approximation)
공급 전압 +5 V single supply —
Analog Input Range (MAX198) 0 to 10 V / 0 to 5 V / ±10 V / ±5 V / 0 to 4 V / ±4 V (software programmable) —
Digital Interface Parallel, 8/16-bit bus compatible, three-state I/O Serial (SPI/QSPI/MICROWIRE) or 8-bit parallel
Logic Compatibility TTL/CMOS —
Internal Reference Voltage 4.096 V —
Integral Non-Linearity (INL) ±0.5 LSB (A grade) —
Power Dissipation (active) 60 mW typical —
Power Dissipation (power-down) < 1 mW —
동작 온도 범위 0 °C to +70 °C (C suffix, commercial) —
패키지 28-pin PDIP (N) 24-pin wide-body SOIC (W)
실장 유형 Through-Hole (THT) Surface Mount
MSL 레벨 1 (unlimited) —
RoHS 상태 [DATA_NEEDED: RoHS status of the bare CNI suffix] Compliant
Analog Supply Voltage — 4.75 V to 5.25 V (single +5 V)
Digital Supply Voltage — Same as AVDD or separate +5 V
Internal Reference — 2.5 V (precision buried-zener)
입력 전압 범위 — 0 to +5 V unipolar; ±5 V, ±VREF bipolar (software-selected)
Integral Nonlinearity (INL) — ±0.5 LSB (max, B-grade)
Offset Error — ±2 LSB (max)
Gain Error — ±2 LSB (max)
SINAD — 70 dB (typ)
Active Supply Current — 1.0 mA (typ, AVDD)
셧다운 전류 — 2 µA (typ)
동작 온도 — 0 °C to +70 °C (commercial)
Reference Capacitor — 4.7 µF external on REF pin

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청