MAX198ACNI vs MAX198AENI 비교

다음의 상세 나란히 비교: MAX198ACNI 제조: Analog Devices 및 MAX198AENI 제조: Maxim Integrated. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

사양 비교

파라미터 MAX198ACNI MAX198AENI
브랜드 Analog Devices Maxim Integrated
카테고리 ADC/DAC ADC/DAC
수명 주기 상태 Obsolete 활성
재고 상태 In Stock In Stock
단가 (USD) $9.80 $10.95
Manufacturer Analog Devices (formerly Maxim Integrated) —
Product Type Data Acquisition System (DAS) / Multi-Channel SAR ADC —
분해능 12 bit 12 bits
Number of Channels 6 single-ended or 3 differential —
샘플링 속도 100 ksps —
Architecture SAR (Successive Approximation Register) Data Acquisition System (DAS) - 8-channel 12-bit ADC
공급 전압 +5 V single supply —
Analog Input Range (MAX198) 0 to 10 V / 0 to 5 V / ±10 V / ±5 V / 0 to 4 V / ±4 V (software programmable) —
Digital Interface Parallel, 8/16-bit bus compatible, three-state I/O —
Logic Compatibility TTL/CMOS —
Internal Reference Voltage 4.096 V 4.18 V ±1%
Integral Non-Linearity (INL) ±0.5 LSB (A grade) —
Power Dissipation (active) 60 mW typical —
Power Dissipation (power-down) < 1 mW —
동작 온도 범위 0 °C to +70 °C (C suffix, commercial) —
패키지 28-pin PDIP (N) 28-pin PDIP (DIP-28, 300 mil)
실장 유형 Through-Hole (THT) Through-Hole
MSL 레벨 1 (unlimited) —
RoHS 상태 [DATA_NEEDED: RoHS status of the bare CNI suffix] —
Number of Input Channels — 8 single-ended
Conversion Rate — 100 ksps (max)
입력 전압 범위 — ±4.18 V (bipolar)
Analog Supply Voltage — ±5 V (single +5 V supply)
Digital Supply Voltage — +5 V
Analog Supply Current — 6 mA at 100 ksps
Reference Drift — 35 ppm/°C
Relative Accuracy (INL) — ±0.5 LSB (max)
Overvoltage Protection — ±16.5 V
데이터 버스 폭 — 12-bit parallel
Bus Interface Compatibility — 80C31, 68HC11, TTL/CMOS logic
동작 온도 — -40 °C to +85 °C

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청