MAX202CD vs LT1030CD 비교
다음의 상세 나란히 비교: MAX202CD 제조: Texas Instruments 및 LT1030CD 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | MAX202CD | LT1030CD |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Dual RS-232 line driver and receiver | — |
| Supply Voltage Range | 4.5 V to 5.5 V | ±5 V to ±15 V |
| Number of Drivers | 2 | — |
| Number of Receivers | 2 | — |
| ESD Protection | ±15 kV pin-to-pin on serial-port connection pins, including ground | — |
| RS-232 Standard | TIA/EIA-232-F | — |
| Interface Function | Electrical interface between asynchronous communication controller and serial-port connector | — |
| 패키지 | 16-pin SOIC | 14-SOIC (D) |
| 실장 유형 | Surface mount | Surface Mount |
| Charge-Pump Circuit | Dual charge-pump circuit | — |
| Channel Configuration | 2 drivers and 2 receivers | — |
| 동작 온도 | [DATA_NEEDED: operating temperature range] | — |
| 대기 전류 | [DATA_NEEDED: quiescent current] | — |
| 데이터 속도 | [DATA_NEEDED: maximum data rate] | — |
| Driver Output Voltage | [DATA_NEEDED: RS-232 driver output voltage] | — |
| Receiver Input Threshold | [DATA_NEEDED: receiver input threshold] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| 기능 | — | Line Driver |
| Number of Drivers/Receivers | — | 4 / 0 |
| Protocol | — | EIA/TIA-232-F (RS-232) |
| Typical Supply Current | — | 500 µA |
| Shutdown Supply Current | — | 0 µA |
| Output Drive Current | — | 10 mA |
| Externally Applied Output Voltage Tolerance | — | ±30 V |
| Output Swing (positive rail) | — | Within 200 mV of V+ |
| Output Swing (negative rail) | — | Within 1 V of V- |
| 동작 온도 범위 | — | 0 °C to 70 °C |
| 핀 수 | — | 14 |
| Lead Finish | — | NiPdAu |
| 출력 유형 | — | 3-State (open when off) |