MAX202CD vs SP3232EP-L 비교
다음의 상세 나란히 비교: MAX202CD 제조: Texas Instruments 및 SP3232EP-L 제조: Sipex. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | MAX202CD | SP3232EP-L |
|---|---|---|
| 브랜드 | Texas Instruments | Sipex |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Dual RS-232 line driver and receiver | RS-232 transceiver |
| Supply Voltage Range | 4.5 V to 5.5 V | +3.0 V to +5.5 V |
| Number of Drivers | 2 | — |
| Number of Receivers | 2 | — |
| ESD Protection | ±15 kV pin-to-pin on serial-port connection pins, including ground | — |
| RS-232 Standard | TIA/EIA-232-F | — |
| Interface Function | Electrical interface between asynchronous communication controller and serial-port connector | — |
| 패키지 | 16-pin SOIC | 16-pin SSOP |
| 실장 유형 | Surface mount | Surface mount |
| Charge-Pump Circuit | Dual charge-pump circuit | — |
| Channel Configuration | 2 drivers and 2 receivers | — |
| 동작 온도 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| 대기 전류 | [DATA_NEEDED: quiescent current] | — |
| 데이터 속도 | [DATA_NEEDED: maximum data rate] | — |
| Driver Output Voltage | [DATA_NEEDED: RS-232 driver output voltage] | — |
| Receiver Input Threshold | [DATA_NEEDED: receiver input threshold] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| Minimum Data Rate Under Full Load | — | 120 kbps |
| RS-232 Interoperability | — | Down to +2.7 V power source |
| Enhanced ESD Protection | — | ±15 kV |
| Compliance | — | True EIA/TIA-232-F standards from +3.0V to +5.5V power supply |
| Low-Power Shutdown | — | 1 µA with receivers active (SP3222) |
| 핀 수 | — | 16 |
| 공급 전류 | — | [DATA_NEEDED: typical and maximum supply current] |
| Driver Output Levels | — | [DATA_NEEDED: driver output voltage levels] |
| Receiver Input Levels | — | [DATA_NEEDED: receiver input voltage thresholds] |
| Slew Rate | — | [DATA_NEEDED: driver slew rate] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |