MAX202ID vs MAX202CD 비교
다음의 상세 나란히 비교: MAX202ID 제조: Texas Instruments 및 MAX202CD 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | MAX202ID | MAX202CD |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $0.00 | $1.18 |
| Product Type | 5 V dual RS-232 line driver/receiver | Dual RS-232 line driver and receiver |
| Channel Configuration | 2 line drivers and 2 line receivers | 2 drivers and 2 receivers |
| Maximum Data Rate | 120 kbps | — |
| 공급 전압 | 5 V nominal | — |
| 동작 온도 범위 | -40 °C to +85 °C | — |
| Driver Output Levels | ±9 V | — |
| ESD Protection | ±15 kV human-body-model protection | ±15 kV pin-to-pin on serial-port connection pins, including ground |
| External Charge-Pump Capacitors | Four 0.1 µF capacitors | — |
| Interface Standard | TIA/EIA-232-F | — |
| Transceiver Type | Full-duplex 2/2 RS-232 transceiver | — |
| 패키지 | 16-pin SOIC | 16-pin SOIC |
| 실장 유형 | Surface mount | Surface mount |
| Logic Compatibility | TTL/CMOS logic-level interface | — |
| ESD Coverage | Serial-port connection pins, including ground | — |
| Quoted Output Signal Levels | ±5 V EIA/TIA-232E under specified loading | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| RS-232 Standard | — | TIA/EIA-232-F |
| Interface Function | — | Electrical interface between asynchronous communication controller and serial-port connector |
| Charge-Pump Circuit | — | Dual charge-pump circuit |
| 동작 온도 | — | [DATA_NEEDED: operating temperature range] |
| 대기 전류 | — | [DATA_NEEDED: quiescent current] |
| 데이터 속도 | — | [DATA_NEEDED: maximum data rate] |
| Driver Output Voltage | — | [DATA_NEEDED: RS-232 driver output voltage] |
| Receiver Input Threshold | — | [DATA_NEEDED: receiver input threshold] |