MAX211CDB vs SP3232EP-L 비교
다음의 상세 나란히 비교: MAX211CDB 제조: Texas Instruments 및 SP3232EP-L 제조: Sipex. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | MAX211CDB | SP3232EP-L |
|---|---|---|
| 브랜드 | Texas Instruments | Sipex |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $3.23 | $0.12 |
| Product Type | Multichannel RS-232 line driver/receiver | RS-232 transceiver |
| 공급 전압 | 5 V | — |
| Driver Count | 4 | — |
| Receiver Count | 5 | — |
| Maximum Data Rate | 120 kbit/s | — |
| Driver Output Swing | ±9 V | — |
| RS-232 Bus Pin ESD Protection | ±15 kV, human-body model | — |
| Standards Support | TIA/EIA-232-F and ITU V.28 | — |
| 패키지 | 28-pin SSOP, 5.30 mm width | 16-pin SSOP |
| 실장 유형 | Surface mount | Surface mount |
| Shutdown Feature | Three driver outputs can be placed in shutdown | — |
| Power-Supply Topology | Single 5 V supply with integrated charge-pump circuitry | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | — |
| 공급 전류 | [DATA_NEEDED: operating supply current] | [DATA_NEEDED: typical and maximum supply current] |
| Shutdown Supply Current | Low; exact value [DATA_NEEDED: shutdown supply current] | — |
| Driver Input Logic Levels | [DATA_NEEDED: driver input logic thresholds] | — |
| Receiver Output Logic Levels | [DATA_NEEDED: receiver output logic levels] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Supply Voltage Range | — | +3.0 V to +5.5 V |
| Minimum Data Rate Under Full Load | — | 120 kbps |
| RS-232 Interoperability | — | Down to +2.7 V power source |
| Enhanced ESD Protection | — | ±15 kV |
| Compliance | — | True EIA/TIA-232-F standards from +3.0V to +5.5V power supply |
| Low-Power Shutdown | — | 1 µA with receivers active (SP3222) |
| 핀 수 | — | 16 |
| 동작 온도 | — | [DATA_NEEDED: operating temperature range] |
| Driver Output Levels | — | [DATA_NEEDED: driver output voltage levels] |
| Receiver Input Levels | — | [DATA_NEEDED: receiver input voltage thresholds] |
| Slew Rate | — | [DATA_NEEDED: driver slew rate] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |