MAX232ACSE+ vs MAX232ACSE+T 비교

다음의 상세 나란히 비교: MAX232ACSE+ 제조: Analog Devices 및 MAX232ACSE+T 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Analog Devices
MAX232ACSE+ MAX232ACSE+ - +5V RS-232 Transceiver | Analog Devices

MAX232ACSE+ - +5V RS-232 Transceiver | Analog Devices

MAX232ACSE+ ✓ 활성

사양 비교

파라미터 MAX232ACSE+ MAX232ACSE+T
브랜드 Analog Devices Analog Devices
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 활성
Product Type RS-232 line driver and receiver transceiver —
공급 전압 +5 V 4.5 V to 5.5 V
Number of Transmitters 2 transmitters —
Number of Receivers 2 receivers 2
Interface Standard EIA/TIA-232E and V.28/V.24 —
패키지 16-pin SOIC, 3.9 mm nominal body width 16-SOIC (NSOIC, narrow body, 0.154" / 3.90 mm width)
실장 유형 Surface mount Surface Mount
Data Direction 2/2 transceiver configuration —
Output Driver Type RS-232 line driver —
Receiver Type RS-232 line receiver —
Maximum Data Rate [DATA_NEEDED: maximum data rate] —
동작 온도 범위 [DATA_NEEDED: operating temperature range] —
공급 전류 [DATA_NEEDED: supply current] —
Charge-Pump Capacitors [DATA_NEEDED: recommended charge-pump capacitor values] —
ESD Protection [DATA_NEEDED: ESD protection rating] —
RoHS 상태 unknown Compliant
REACH Status unknown —
AEC-Q100 Qualification not_applicable —
Lead-Free Status unknown —
Halogen-Free Status unknown —
기능 — RS-232 Transceiver (2 Driver / 2 Receiver)
데이터 속도 — 200 kbps
Number of Drivers — 2
Duplex — Full
Receiver Input Voltage Range — ±30 V (HBM ESD tolerance on RS-232 inputs)
동작 온도 — 0 °C to +70 °C (C grade)
Charge Pump Capacitors — 4 x 0.1 µF external (typical)
Shutdown Mode — Yes (active-low, device-dependent)
MSL 레벨 — [DATA_NEEDED: MSL level]
Packaging — Tape & Reel (+T suffix)

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청