MAX232CEAWE+T vs MAX232CSE+T 비교

다음의 상세 나란히 비교: MAX232CEAWE+T 제조: Analog Devices 및 MAX232CSE+T 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Analog Devices
MAX232CEAWE+T MAX232CEAWE+T - 2/2 RS-232 Transceiver | Analog Devices

MAX232CEAWE+T - 2/2 RS-232 Transceiver | Analog Devices

MAX232CEAWE+T ✓ 활성

사양 비교

파라미터 MAX232CEAWE+T MAX232CSE+T
브랜드 Analog Devices Analog Devices
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 활성
Product Type 2/2 full RS-232 transceiver —
Transmitter Configuration 2 transmitters —
Receiver Configuration 2 receivers —
Interface Standard RS-232 —
공급 전압 +5 V —
동작 온도 범위 -40°C to +125°C 0 °C to +70 °C (commercial C-grade)
패키지 16-SOIC 16-pin Narrow SOIC (SOIC-N-16)
핀 수 16 pins —
실장 유형 Surface mount Surface Mount
Channel Direction Full duplex —
Driver and Receiver Count 2 drivers and 2 receivers —
데이터 속도 [DATA_NEEDED: maximum data rate] 120 kb/s
Input and Output Logic Levels [DATA_NEEDED: logic-level thresholds] —
RS-232 Output Voltage [DATA_NEEDED: driver output voltage] —
Charge-Pump Capacitors [DATA_NEEDED: recommended external capacitor values] —
Supply Decoupling [DATA_NEEDED: recommended bypass capacitor value] —
RoHS 상태 unknown —
REACH Status unknown —
AEC-Q100 Qualification unknown —
기능 — RS-232 Line Driver/Receiver (Transceiver)
Number of Drivers — 2
Number of Receivers — 2
Protocol — RS-232 (EIA/TIA-232E, V.28/V.24)
Supply Voltage (Vcc) — 4.5 V to 5.5 V (single +5V supply)
RS-232 Driver Output Voltage — ±7.5 V minimum (typical ±9 V) into 3 kΩ load
Receiver Input Voltage Range — ±30 V
Charge Pump — Internal; requires 4 × 1 µF external capacitors
MSL 레벨 — 1 (unlimited floor life at <30 °C / 85 % RH)
Lead-Free / RoHS — Yes (compliant per +T suffix)
Receiver Input Hysteresis — [DATA_NEEDED: receiver hysteresis voltage]
Supply Current (No Load) — [DATA_NEEDED: typical Icc]
Packaging — Tape & Reel (T+R)

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청