MAX232ECSE+ vs MAX232BASE+T 비교
다음의 상세 나란히 비교: MAX232ECSE+ 제조: Analog Devices 및 MAX232BASE+T 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | MAX232ECSE+ | MAX232BASE+T |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | Obsolete |
| Product Type | RS-232 transceiver | — |
| Driver and Receiver Configuration | 2 drivers / 2 receivers | — |
| 데이터 속도 | 120 kbps | — |
| 공급 전압 | +5 V | — |
| Interface Standard | RS-232 and V.28 | — |
| ESD Protection | ±15 kV HBM | — |
| Charge Pump | Integrated | — |
| External Supply Requirement | No external ±10 V supply required | — |
| Logic Level Compatibility | TTL/CMOS | — |
| 패키지 | 16-SOIC (NSOIC) | 16-pin SOIC |
| 실장 유형 | Surface mount | Surface mount |
| 동작 온도 | Extended temperature option; exact range in ordering information | — |
| 핀 수 | 16 pins | — |
| Compliance Status | RoHS and REACH status; exact declarations require manufacturer confirmation | — |
| Automotive Qualification | Not specified as AEC-Q100 qualified | — |
| Output Driver Current | [DATA_NEEDED: output driver current] | — |
| Receiver Propagation Delay | [DATA_NEEDED: receiver propagation delay] | — |
| Quiescent Supply Current | [DATA_NEEDED: quiescent supply current] | — |
| Device Type | — | RS-232 transceiver |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| Duplex Mode | — | Full duplex |
| Maximum Data Rate | — | 200 kbps |
| Nominal Supply Voltage | — | 5 V |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Receiver Hysteresis | — | 500 mV |
| 동작 온도 범위 | — | 0°C to +70°C |
| Product Description | — | IC RS-232 DRVR/RCVR COTS |
| Series | — | MAX232 |
| Logic Compatibility | — | [DATA_NEEDED: logic compatibility] |
| Driver Output Voltage Range | — | [DATA_NEEDED: driver output voltage range] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |
| 공급 전류 | — | [DATA_NEEDED: supply current] |
| RoHS 상태 | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |