MAX232EEWE+ vs MAX232ECDWR 비교
다음의 상세 나란히 비교: MAX232EEWE+ 제조: Analog Devices 및 MAX232ECDWR 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
MAX232ECDWR - Dual 250kbps RS-232 Transceiver | Texas Instruments
MAX232ECDWR ✓ 활성사양 비교
| 파라미터 | MAX232EEWE+ | MAX232ECDWR |
|---|---|---|
| 브랜드 | Analog Devices | Texas Instruments |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Dual RS-232 driver/receiver transceiver | Dual RS-232 driver/receiver |
| Number of Drivers | 2 | — |
| Number of Receivers | 2 | 2 |
| 공급 전압 | +5 V | — |
| Maximum Data Rate | 120 kbps | 250 kbps |
| RS-232 Standard | EIA/TIA-232E | — |
| ITU Standard | CCITT V.28 | — |
| 패키지 | 16-pin wide SOIC | 16-pin SOIC (DW), 0.295 inch / 7.50 mm width |
| 실장 유형 | Surface mount | Surface mount |
| Transmitter Output Type | RS-232 bipolar line output | RS-232 line driver |
| Receiver Output Type | TTL/CMOS logic output | TTL/CMOS logic-level receiver |
| Voltage Generation | On-chip charge-pump voltage generator | — |
| External Storage Capacitors | [DATA_NEEDED: required charge-pump capacitor values] | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Number of Transmitters | — | 2 |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Supply Type | — | Single 5 V supply |
| ESD Protection Standard | — | IEC 61000-4-2 |
| Charge-Pump Architecture | — | Capacitive voltage generator with external capacitors |
| Number of External Charge-Pump Capacitors | — | 4 |
| Bypass Capacitor Connection | — | 1 external capacitor pin |
| Input Logic Levels | — | [DATA_NEEDED: receiver input logic thresholds] |
| RS-232 Common-Mode Voltage Range | — | [DATA_NEEDED: RS-232 common-mode voltage range] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |