MAX232EPE vs SP3232EA-L 비교

다음의 상세 나란히 비교: MAX232EPE 제조: Maxim Integrated 및 SP3232EA-L 제조: Sipex. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

사양 비교

파라미터 MAX232EPE SP3232EA-L
브랜드 Maxim Integrated Sipex
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 Unknown
재고 상태 — In Stock
단가 (USD) — $0.27
Product Type RS-232 Transceiver (Driver/Receiver) RS-232 transceiver IC
Drivers / Receivers 2 / 2 —
공급 전압 4.5 V to 5.5 V (single +5V supply) —
데이터 속도 120 kbps (typical) Minimum 120 kbps under full load
RS-232 Output Voltage ±10 V (typical, generated internally by charge pump) —
동작 온도 -40 C to +85 C (extended industrial) [DATA_NEEDED: operating temperature range]
패키지 16-PDIP (Plastic DIP, 0.300 inch / 7.62 mm) —
실장 유형 Through-Hole Surface mount
External Charge-Pump Capacitors 4 x 1 uF (typical, tantalum or ceramic) —
ESD Protection ±15 kV HBM on RS-232 pins (per Maxim datasheet family) —
Receiver Input Levels ±30 V tolerant —
Standards Compliance EIA/TIA-232E, V.28, V.24 —
MSL 레벨 1 (unlimited) —
RoHS 상태 Compliant (lead-free + indicates lead-free finish) [DATA_NEEDED: RoHS status]
핀 수 16 —
Transmitter and Receiver Configuration — 1 transmitter and 1 receiver
Supply Voltage Range — +3.0 V to +5.5 V
Low-Voltage Interoperability — RS-232 interoperable down to +2.7 V power source
Standard Compliance — True EIA/TIA-232-F standards
Shutdown Feature — 1 µA low-power shutdown with receivers active (SP3222)
Enhanced ESD Specifications — ±15 kV
Charge-Pump Operation — High-efficiency charge-pump power supply
External Capacitor Requirement — 0.1 µF capacitors in 3.3 V operation
Nominal Package — 16-SSOP
Receiver Logic Levels — [DATA_NEEDED: receiver input thresholds]
Transmitter Output Levels — [DATA_NEEDED: RS-232 output voltage levels]
Absolute Maximum Supply Voltage — [DATA_NEEDED: absolute maximum supply voltage]
REACH Status — [DATA_NEEDED: REACH status]
Pinout — [DATA_NEEDED: exact SP3232EA-L pin names and numbering]

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청