MAX3070EASD+T vs MAX3070EESD+T 비교
다음의 상세 나란히 비교: MAX3070EASD+T 제조: Maxim Integrated 및 MAX3070EESD+T 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | MAX3070EASD+T | MAX3070EESD+T |
|---|---|---|
| 브랜드 | Maxim Integrated | Analog Devices |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | RS-485/RS-422 interface transceiver | RS-485/RS-422 transceiver |
| 공급 전압 | 3.3 V | — |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| Supported Interfaces | RS-485 and RS-422 | — |
| ESD Protection | ±15 kV | ±15 kV |
| Fail-Safe Receiver | Yes | — |
| Fail-Safe Open-Input Output | Logic-high | — |
| Fail-Safe Shorted-Input Output | Logic-high | — |
| Hot-Swap Support | Yes | Yes |
| 패키지 | 14-pin SOIC | 14-pin narrow SOIC |
| 실장 유형 | Surface mount | Surface mount |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification status] |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | 250 kbps |
| Propagation Delay | [DATA_NEEDED: driver and receiver propagation delay] | — |
| 공급 전류 | [DATA_NEEDED: operating supply current] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | — |
| Supply Voltage Range | — | 2.97 V to 3.63 V |
| Nominal Supply Voltage | — | 3.3 V |
| Number of Drivers | — | 1 driver |
| Number of Receivers | — | 1 receiver |
| Communication Mode | — | Full duplex |
| Supported Standards | — | RS-422 and RS-485 |
| Receiver Fail-Safe Behavior | — | Logic-high output when receiver inputs are open or shorted |
| RoHS Compliance | — | Compliant |
| REACH Compliance | — | Unaffected |
| Moisture Sensitivity Level | — | MSL 1 (unlimited) |
| Termination | — | [DATA_NEEDED: external termination requirements] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Logic Levels | — | [DATA_NEEDED: receiver input threshold voltages] |