MAX3095CEE+T vs MAX3095CEE+ 비교

다음의 상세 나란히 비교: MAX3095CEE+T 제조: Analog Devices 및 MAX3095CEE+ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

사양 비교

파라미터 MAX3095CEE+T MAX3095CEE+
브랜드 Analog Devices Analog Devices
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 활성
Product Type Quad RS-422/RS-485 receiver —
Number of Receiver Channels 4 channels —
Maximum Data Rate 10 Mbps —
Supply Voltage Operation 3 V/5 V —
Interface Standards RS-422/RS-485 —
ESD Protection ±15 kV —
Air-Gap ESD Test ±15 kV using IEC 1000-4-2 —
패키지 16-pin QSOP 16-pin QSOP
실장 유형 Surface mount Surface Mount
Power Consumption Low-power operation —
Receiver Output Type Logic-level differential receiver —
동작 온도 범위 [DATA_NEEDED: operating temperature range] —
공급 전류 [DATA_NEEDED: supply current] 13 mA typical (all channels active)
Input Differential Threshold [DATA_NEEDED: input differential threshold] —
Common-Mode Voltage Range [DATA_NEEDED: common-mode voltage range] —
Maximum Input Voltage [DATA_NEEDED: maximum input voltage] —
Lead Length [DATA_NEEDED: lead length] —
RoHS 상태 [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
기능 — Receiver (0/4 driver/receiver)
Protocol — RS-422, RS-485
Number of Receivers — 4
데이터 속도 — 10 Mbps (minimum)
공급 전압 — 4.75 V to 5.25 V (5 V nominal)
ESD Protection (Receiver Inputs) — ±15 kV HBM
Common-Mode Input Range — -7 V to +12 V
Differential Input Threshold — ±200 mV typical
Input Hysteresis — 25 mV typical
Fail-Safe Bias — Yes (internal, forces logic-high on open/short inputs)
동작 온도 — 0 °C to +70 °C (commercial C-grade)
MSL 레벨 — 1 (unlimited)
Lead-Free — Yes

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청