MAX3095ESE+ vs MAX3051ESA+ 비교
다음의 상세 나란히 비교: MAX3095ESE+ 제조: Analog Devices 및 MAX3051ESA+ 제조: Maxim Integrated. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | MAX3095ESE+ | MAX3051ESA+ |
|---|---|---|
| 브랜드 | Analog Devices | Maxim Integrated |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $4.87 | $1.55 |
| Product Type | Quad RS-422/RS-485 receiver | — |
| Number of Receivers | 4 | — |
| 데이터 속도 | 10 Mbps | 1 Mbps (max, high-speed mode) |
| 공급 전압 | 3 V to 5 V | 3.135 V to 3.465 V (3.3 V nominal) |
| ESD Protection | ±15 kV | — |
| 패키지 | 16-pin SOIC | 8-pin SOIC (SO-8 narrow body) |
| Interface Standards | RS-422 and RS-485 | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis] | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | — |
| 공급 전류 | [DATA_NEEDED: supply current] | Low-supply-current design |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| Output Logic Levels | [DATA_NEEDED: output logic levels] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Maximum Slew Rate | [DATA_NEEDED: maximum slew rate] | — |
| ESD Test Method | IEC 1000-4-2 Air-Gap Discharge; additional protected levels per manufacturer product data | — |
| RoHS 상태 | unknown | Compliant |
| REACH Status | unknown | — |
| Automotive Qualification | unknown | — |
| 실장 유형 | Surface Mount | Surface Mount |
| 기능 | — | CAN Bus Transceiver |
| Number of Drivers/Receivers | — | 1/1 |
| Protocol | — | CANbus |
| Operating Modes | — | High-Speed, Slope-Control, Standby, Shutdown |
| Bus Common-Mode Range | — | -7 V to +12 V |
| ISO 11898 Compliance | — | Exceeds -2 V to +7 V minimum |
| Slew Rate Control | — | Programmable |
| 동작 온도 | — | -40 C to +85 C |
| Lead-Free | — | Yes |
| ESD Protection (HBM, bus pins) | — | [DATA_NEEDED: bus-pin HBM ESD rating] |
| Standby Current | — | [DATA_NEEDED: standby/shutdown Iq] |