MAX3232CPWR vs MAX3232EIPW 비교
다음의 상세 나란히 비교: MAX3232CPWR 제조: Texas Instruments 및 MAX3232EIPW 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | MAX3232CPWR | MAX3232EIPW |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Dual RS-232 line driver/receiver transceiver | — |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbit/s | 250 kbps |
| Number of Drivers | 2 | — |
| Number of Receivers | 2 | — |
| ESD Protection | ±15 kV | ±15 kV IEC ESD, pin-to-pin |
| Typical Supply Current | 300 µA | — |
| External Charge-Pump Capacitors | 0.1 µF | — |
| Logic Compatibility | Accepts 5-V logic | — |
| Standards Compliance | Meets or exceeds TIA/EIA-232-F and ITU V.28 requirements | — |
| 패키지 | 16-pin TSSOP (PW) | 16-pin TSSOP |
| 실장 유형 | Surface mount | Surface mount |
| 인터페이스 유형 | RS-232 | — |
| Channel Configuration | 2/2 full RS-232 transceiver | — |
| Operating Supply | Single 3 V to 5.5 V supply | — |
| Protection Scope | RS-232 line-driver and receiver terminals, including ground | — |
| Manufacturer | Texas Instruments | — |
| Device Type | — | Dual RS-232 line driver/receiver with dual charge pump |
| Number of Transmit Channels | — | 2 channels |
| Number of Receive Channels | — | 2 channels |
| RS-232 Compliance | — | TIA/EIA-232-F |
| Interface Direction | — | Full duplex |
| 동작 온도 범위 | — | [DATA_NEEDED: operating temperature range] |
| 공급 전류 | — | [DATA_NEEDED: supply current] |
| Input Logic Voltage | — | [DATA_NEEDED: input logic voltage threshold] |
| Output Logic Voltage | — | [DATA_NEEDED: output logic voltage level] |
| Driver Output Swing | — | [DATA_NEEDED: RS-232 output swing] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |
| Charge-Pump Capacitors | — | [DATA_NEEDED: recommended charge-pump capacitance] |
| RoHS 상태 | — | unknown |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |