MAX3232ECDBR vs MAX3232IDBR 비교
다음의 상세 나란히 비교: MAX3232ECDBR 제조: Texas Instruments 및 MAX3232IDBR 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
MAX3232ECDBR - RS-232 Transceiver 3-5.5V ±15kV ESD | TI (Tape & Reel)
MAX3232ECDBR ✓ 활성Texas Instruments
MAX3232IDBR - 250kbps Dual RS-232 Transceiver | Texas Instruments
MAX3232IDBR ✓ 활성사양 비교
| 파라미터 | MAX3232ECDBR | MAX3232IDBR |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Protocol | RS-232 | — |
| Type | Transceiver | — |
| Number of Drivers | 2 | 2 channels |
| Number of Receivers | 2 | 2 channels |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
| 데이터 속도 | 250 kbps (minimum) | — |
| ESD Protection (RS-232 Bus Pins) | ±15 kV (HBM) | — |
| ESD Protection (IEC 61000-4-2) | ±15 kV contact discharge / ±15 kV air-gap discharge | — |
| Standard Compliance | TIA/EIA-232-F | — |
| 동작 온도 | 0C to +70C | — |
| 패키지 | 16-SSOP (DB, 0.209 in / 5.30 mm width) | 16-pin SSOP (DB) |
| 실장 유형 | Surface Mount | Surface mount |
| Packaging | Tube | — |
| External Capacitors Required | 4 x 0.1 uF (charge pump) | — |
| Lead Free Status | [DATA_NEEDED: lead free status] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | — |
| Product Type | — | Dual RS-232 line driver/receiver |
| Maximum Data Rate | — | 250 kbps |
| ESD Protection | — | ±15 kV |
| 동작 온도 범위 | — | -40°C to +85°C |
| Package Width | — | 5.30 mm |
| Package Length | — | 0.209 inch |
| Moisture Sensitivity Level | — | MSL 1 at 260°C/ unlimited floor life |
| RoHS Compliance | — | RoHS3 compliant |
| REACH Compliance | — | Not specified |
| 수명 주기 상태 | — | Active |
| Manufacturer Lead Time | — | 6 weeks |
| Automotive Qualification | — | Not specified |
| Charge-Pump Capacitors | — | [DATA_NEEDED: recommended charge-pump capacitor values] |
| Supply Bypass Capacitor | — | [DATA_NEEDED: recommended supply bypass capacitor value] |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| Driver Output Voltage | — | [DATA_NEEDED: RS-232 output voltage levels] |