MAX3483ECPA+ vs MAX3483CPA+ 비교

다음의 상세 나란히 비교: MAX3483ECPA+ 제조: Analog Devices 및 MAX3483CPA+ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Analog Devices
MAX3483ECPA+ MAX3483ECPA+ - 12Mbps RS-485 Transceiver | Analog Devices

MAX3483ECPA+ - 12Mbps RS-485 Transceiver | Analog Devices

MAX3483ECPA+ ✓ 활성

사양 비교

파라미터 MAX3483ECPA+ MAX3483CPA+
브랜드 Analog Devices Analog Devices
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 활성
Product Type Half-duplex RS-485/RS-422 transceiver RS-485/RS-422 transceiver
공급 전압 3.3 V 3.0 V to 3.6 V
Operating Supply Range 3 V to 3.6 V —
Maximum Data Rate 12Mbps —
ESD Protection ±15kV —
Driver Count 1 driver 1
Receiver Count 1 receiver 1
Supported Standards RS-485 and RS-422 —
Duplex Mode Half-duplex Half-duplex
Driver Edge Rate Slew-rate limited —
Package Type 8-pin PDIP through-hole package —
Total Pin Count 8 pins —
Production Status Production —
Datasheet Revision Revision 2 —
Temperature Range [DATA_NEEDED: operating temperature range] —
공급 전류 [DATA_NEEDED: typical and maximum supply current] —
Receiver Differential Threshold [DATA_NEEDED: receiver differential threshold] —
Driver Output Voltage [DATA_NEEDED: driver output voltage] —
Common-Mode Voltage Range [DATA_NEEDED: common-mode voltage range] —
RoHS 상태 [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
데이터 속도 — 250 kbps
Receiver Hysteresis — 50 mV
Protocols — RS-422 and RS-485
Slew-Rate-Limited Driver — Yes
동작 온도 — 0C to 70C
실장 유형 — Through hole
패키지 — 8-pin PDIP
Logic Direction — Single transmitter and single receiver
Driver Architecture — True differential RS-485/RS-422
EMI Behavior — Slew-rate limiting minimizes EMI
Cable Reflection Control — Slew-rate limiting helps reduce reflections
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청