MAX3483ECPA+ vs MAX3483EEPA+ 비교
다음의 상세 나란히 비교: MAX3483ECPA+ 제조: Analog Devices 및 MAX3483EEPA+ 제조: Maxim Integrated. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | MAX3483ECPA+ | MAX3483EEPA+ |
|---|---|---|
| 브랜드 | Analog Devices | Maxim Integrated |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Half-duplex RS-485/RS-422 transceiver | — |
| 공급 전압 | 3.3 V | — |
| Operating Supply Range | 3 V to 3.6 V | — |
| Maximum Data Rate | 12Mbps | 12 Mbps |
| ESD Protection | ±15kV | ±15 kV |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| Supported Standards | RS-485 and RS-422 | — |
| Duplex Mode | Half-duplex | Half-duplex |
| Driver Edge Rate | Slew-rate limited | — |
| Package Type | 8-pin PDIP through-hole package | — |
| Total Pin Count | 8 pins | — |
| Production Status | Production | — |
| Datasheet Revision | Revision 2 | — |
| Temperature Range | [DATA_NEEDED: operating temperature range] | — |
| 공급 전류 | [DATA_NEEDED: typical and maximum supply current] | [DATA_NEEDED: supply current] |
| Receiver Differential Threshold | [DATA_NEEDED: receiver differential threshold] | — |
| Driver Output Voltage | [DATA_NEEDED: driver output voltage] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | [DATA_NEEDED: common-mode voltage range] |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Protocol / Standard | — | RS-485 / RS-422 |
| Transceiver Configuration | — | 1 driver / 1 receiver |
| Supply Voltage Range | — | 3.0 V to 3.6 V |
| Receiver Hysteresis | — | 50 mV |
| Driver Slew Rate | — | Slew-rate limited (EMI controlled) |
| 동작 온도 범위 | — | -40 °C to +85 °C |
| Temperature Grade | — | Industrial |
| 패키지 | — | 8-PDIP (8-pin plastic DIP, through-hole) |
| 실장 유형 | — | Through Hole |
| Number of Terminals | — | 8 |
| Package Shape | — | Rectangular |
| Driver Output Differential Voltage | — | [DATA_NEEDED: driver output differential voltage] |
| Receiver Output Logic Levels | — | [DATA_NEEDED: receiver output logic levels] |