MAX3483ESA+T vs MAX3483EESA+T 비교

다음의 상세 나란히 비교: MAX3483ESA+T 제조: Analog Devices 및 MAX3483EESA+T 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Analog Devices
MAX3483ESA+T MAX3483ESA+T - 3.3V RS-485/RS-422 Transceiver | ADI

MAX3483ESA+T - 3.3V RS-485/RS-422 Transceiver | ADI

MAX3483ESA+T ✓ 활성

사양 비교

파라미터 MAX3483ESA+T MAX3483EESA+T
브랜드 Analog Devices Analog Devices
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 활성
Product Type RS-485/RS-422 transceiver RS-485/RS-422 transceiver
공급 전압 3.3 V 3.3 V
Maximum Data Rate 10 Mbps 12 Mbps
Documented Low-Rate Operation Up to 250 kbps —
Driver Count 1 driver —
Receiver Count 1 receiver —
Communication Mode Half-duplex —
Standards Supported RS-485 and RS-422 —
Driver Type Slew-rate-limited true differential driver Slew-rate-limited true driver
Disabled Output State High impedance —
Controls Driver Enable and Receiver Enable —
패키지 8-SOIC, 8 pins 8-pin NSOIC
실장 유형 Surface mount Surface mount
동작 온도 [DATA_NEEDED: operating temperature range] —
공급 전류 [DATA_NEEDED: operating supply current] [DATA_NEEDED: supply current]
ESD Protection [DATA_NEEDED: ESD protection rating for exact suffix] ±15 kV
RoHS 상태 [DATA_NEEDED: RoHS compliance status] [DATA_NEEDED: RoHS status]
Transceiver Configuration — 1 driver and 1 receiver
동작 공급 전압 — 3 V to 3.6 V
Supported Standards — RS-485 and RS-422
Duplex Mode — Half-duplex
핀 수 — 8 pins
동작 온도 범위 — [DATA_NEEDED: operating temperature range]
Common-Mode Voltage Range — [DATA_NEEDED: common-mode voltage range]
Driver Output Current — [DATA_NEEDED: driver output current]
Receiver Input Resistance — [DATA_NEEDED: receiver input resistance]
Propagation Delay — [DATA_NEEDED: propagation delay]
REACH Status — [DATA_NEEDED: REACH status]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification]

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청