MAX3485CSA+T vs MAX3485CSA+ 비교
다음의 상세 나란히 비교: MAX3485CSA+T 제조: Analog Devices 및 MAX3485CSA+ 제조: Maxim Integrated. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | MAX3485CSA+T | MAX3485CSA+ |
|---|---|---|
| 브랜드 | Analog Devices | Maxim Integrated |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | Unknown |
| Product Type | RS-485/RS-422 half-duplex transceiver | RS-485/RS-422 transceiver |
| Supply Voltage Range | 3 V to 3.6 V | — |
| Maximum Data Rate | 10 Mbps | — |
| Driver Channels | 1 | — |
| Receiver Channels | 1 | — |
| Duplex Mode | Half-duplex | Half-duplex |
| Supported Standards | RS-422 and RS-485 | RS-485 and RS-422 |
| 패키지 | 8-pin SOIC (NSOIC-8) | 8-SOIC, 0.154 inch, 3.90 mm width |
| 실장 유형 | Surface mount | Surface mount |
| Driver Edge Rate | Slew-rate limited | — |
| Driver Fault Protection | Short-circuit current limiting and thermal shutdown | — |
| Receiver Fail-Safe | Supported | — |
| Driver Output State During Thermal Shutdown | High impedance | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | 0C to +70C |
| Quiescent Supply Current | [DATA_NEEDED: quiescent supply current] | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | [DATA_NEEDED: ESD protection rating] |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Standard Reel Quantity | [DATA_NEEDED: standard reel quantity] | — |
| 공급 전압 | — | 3.3 V |
| 데이터 속도 | — | 10 Mbps |
| Driver Count | — | 1 driver |
| Receiver Count | — | 1 receiver |
| Driver Feature | — | Slew-rate-limited driver family feature |
| Short-Circuit Protection | — | Short-circuit current limited driver |
| 열 차단 | — | Driver enters high-impedance state during thermal shutdown |
| Receiver Feature | — | Fail-safe receiver input |
| Channel Direction | — | 1 transmitter and 1 receiver |
| Receiver Input Common-Mode Range | — | [DATA_NEEDED: receiver input common-mode range] |
| 공급 전류 | — | [DATA_NEEDED: operating and quiescent supply current] |
| Logic Output Levels | — | [DATA_NEEDED: logic output voltage levels] |
| Termination Requirement | — | [DATA_NEEDED: termination and biasing requirements] |