MAX3485ECPA+ vs MAX3485EPA+ 비교

다음의 상세 나란히 비교: MAX3485ECPA+ 제조: Analog Devices 및 MAX3485EPA+ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Analog Devices
MAX3485EPA+ MAX3485EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3485EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3485EPA+ ✓ 활성

사양 비교

파라미터 MAX3485ECPA+ MAX3485EPA+
브랜드 Analog Devices Analog Devices
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 활성
Product Type RS-485/RS-422 transceiver RS-485/RS-422 interface transceiver
공급 전압 3.3 V —
Maximum Data Rate 12 Mbps —
ESD Protection ±15 kV [DATA_NEEDED: ESD protection rating]
Transceiver Configuration 1 driver / 1 receiver —
Communication Mode Half-duplex —
Supported Standards RS-422 and RS-485 RS-422 and RS-485
Driver Architecture Slew-rate-limited —
패키지 8-pin PDIP 8-pin PDIP
실장 유형 Through-hole Through-hole
ESD Protection Level ±15 kV —
RoHS 상태 Compliant [DATA_NEEDED: RoHS status]
동작 온도 범위 [DATA_NEEDED: operating temperature range] —
공급 전류 [DATA_NEEDED: supply current] —
Driver Output Current [DATA_NEEDED: driver output current] —
Receiver Differential Threshold [DATA_NEEDED: receiver differential threshold] —
Common-Mode Voltage Range [DATA_NEEDED: common-mode voltage range] —
Propagation Delay [DATA_NEEDED: propagation delay] —
Shutdown Supply Current [DATA_NEEDED: shutdown supply current] —
Supply Voltage Range — 3 V to 3.6 V
Transmission Data Rate — Up to 10 Mbps
Driver Count — 1
Receiver Count — 1
Driver Protection — Short-circuit current limiting and thermal shutdown
Driver Output State During Thermal Shutdown — High impedance
Driver Slew Control — Slew-rate limited
Receiver Fail-Safe Feature — Yes
Operating Voltage — 3.3 V nominal
Power Dissipation — [DATA_NEEDED: power dissipation specification]
동작 온도 — [DATA_NEEDED: operating temperature range]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청