MAX3485ECSA+T vs MAX3485ESA+T 비교

다음의 상세 나란히 비교: MAX3485ECSA+T 제조: Analog Devices 및 MAX3485ESA+T 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

사양 비교

파라미터 MAX3485ECSA+T MAX3485ESA+T
브랜드 Analog Devices Analog Devices
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 활성
Product Type RS-485/RS-422 half-duplex transceiver RS-485/RS-422 transceiver
Supply Voltage Range 3 V to 3.6 V —
Maximum Data Rate 12 Mbps 10 Mbps
ESD Protection (Bus Pins) +/-15 kV —
Driver / Receiver Count 1 driver, 1 receiver —
Duplex Half-duplex —
Driver Output Type Slew-rate-limited differential —
패키지 8-pin NSOIC (SOIC-8) 8-SOIC
실장 유형 Surface mount Surface mount
Operating Supply Range 3.3 V powered, single supply —
RoHS 상태 RoHS3 compliant —
Lead-Free Status Lead free —
Driver Protection Short-circuit current limit and thermal shutdown —
ESD Rating Reference +/-15 kV ESD-protected bus pins —
동작 온도 범위 [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Quiescent Supply Current [DATA_NEEDED: quiescent supply current] —
Receiver Common-Mode Range [DATA_NEEDED: receiver common-mode voltage range] —
Unit Load / Max Nodes [DATA_NEEDED: unit load and maximum node count] —
Data Rate of Alternative MAX3485CSA+ 10 Mbps —
공급 전압 — 3.3 V
Driver Count — 1
Receiver Count — 1
Duplex Mode — Half-duplex
Supported Standards — RS-422 and RS-485
Package Dimensions — 3.90 mm width
Ordering Package — Tape and reel
공급 전류 — [DATA_NEEDED: supply current]
Driver Propagation Delay — [DATA_NEEDED: driver propagation delay]
Receiver Propagation Delay — [DATA_NEEDED: receiver propagation delay]
ESD Protection — [DATA_NEEDED: ESD protection rating]
Common-Mode Voltage Range — [DATA_NEEDED: receiver common-mode voltage range]
RoHS Compliance — [DATA_NEEDED: RoHS compliance status]
REACH Compliance — [DATA_NEEDED: REACH compliance status]

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청