MAX485CPA+ vs MAX485ECPA+ 비교
다음의 상세 나란히 비교: MAX485CPA+ 제조: Analog Devices 및 MAX485ECPA+ 제조: Maxim Integrated. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Maxim Integrated
MAX485ECPA+ - 1 Mbps RS-485/RS-422 Half-Duplex Transceiver | Maxim
MAX485ECPA+ ✓ 활성사양 비교
| 파라미터 | MAX485CPA+ | MAX485ECPA+ |
|---|---|---|
| 브랜드 | Analog Devices | Maxim Integrated |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | RS-485/RS-422 low-power transceiver | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Communication Mode | Half-duplex | — |
| Supported Standards | RS-485 and RS-422 | — |
| Signal Type | Differential | — |
| Slew Rate | Slew-rate-limited | — |
| 패키지 | 8-pin PDIP | PDIP-8 (8-pin plastic DIP, through-hole) |
| 실장 유형 | Through-hole | Through Hole |
| 공급 전압 | [DATA_NEEDED: supply voltage] | 5 V nominal (4.5 V to 5.5 V) |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | 1 Mbps (slew-rate-limited driver) |
| Driver Output Current | [DATA_NEEDED: driver output current] | [DATA_NEEDED: output current (standard / high-impedance load)] |
| Receiver Input Impedance | [DATA_NEEDED: receiver input impedance] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Quiescent Supply Current | [DATA_NEEDED: quiescent supply current] | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | — |
| RoHS 상태 | unknown | Compliant (Maxim lead-free suffix '+') |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | unknown | — |
| Lead-Free Status | unknown | — |
| Transceiver Configuration | — | 1 driver / 1 receiver, half-duplex |
| Interface Standard | — | RS-485 / RS-422 differential |
| Driver Output Type | — | Differential, limited slew rate |
| ESD Protection | — | +/-15 kV on driver outputs and receiver inputs |
| 동작 온도 | — | Commercial grade (C suffix) - [DATA_NEEDED: full operating temperature range] |
| Quiescent (Supply) Current | — | [DATA_NEEDED: quiescent current] |
| Receiver Common-Mode Range | — | [DATA_NEEDED: receiver common-mode voltage range] |
| Receiver Input Sensitivity | — | [DATA_NEEDED: receiver differential threshold] |
| Driver Output Differential Voltage | — | [DATA_NEEDED: differential output voltage] |
| Enable Pins | — | DE (driver enable) and /RE (receiver enable, active-low), separate pins |
| Short-Circuit Protection | — | Yes, driver outputs are short-circuit current limited |
| 열 차단 | — | Yes, protects against excessive power dissipation |
| Quiescent Current Shutdown Pin | — | Not present on this device |
| Qualification | — | Industrial temperature option available in family - [DATA_NEEDED: AEC-Q100 status] |