MAX485ECPA+ vs MAX485EEPA+ 비교
다음의 상세 나란히 비교: MAX485ECPA+ 제조: Maxim Integrated 및 MAX485EEPA+ 제조: Maxim Integrated. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Maxim Integrated
MAX485ECPA+ - 1 Mbps RS-485/RS-422 Half-Duplex Transceiver | Maxim
MAX485ECPA+ ✓ 활성사양 비교
| 파라미터 | MAX485ECPA+ | MAX485EEPA+ |
|---|---|---|
| 브랜드 | Maxim Integrated | Maxim Integrated |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Transceiver Configuration | 1 driver / 1 receiver, half-duplex | 1 transmitter and 1 receiver |
| Interface Standard | RS-485 / RS-422 differential | — |
| 공급 전압 | 5 V nominal (4.5 V to 5.5 V) | — |
| Maximum Data Rate | 1 Mbps (slew-rate-limited driver) | [DATA_NEEDED: maximum data rate] |
| Driver Output Type | Differential, limited slew rate | — |
| ESD Protection | +/-15 kV on driver outputs and receiver inputs | 15 kV |
| 패키지 | PDIP-8 (8-pin plastic DIP, through-hole) | — |
| 실장 유형 | Through Hole | Through-hole |
| 동작 온도 | Commercial grade (C suffix) - [DATA_NEEDED: full operating temperature range] | — |
| Quiescent (Supply) Current | [DATA_NEEDED: quiescent current] | — |
| Receiver Common-Mode Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Receiver Input Sensitivity | [DATA_NEEDED: receiver differential threshold] | — |
| Driver Output Differential Voltage | [DATA_NEEDED: differential output voltage] | — |
| Driver Output Current | [DATA_NEEDED: output current (standard / high-impedance load)] | [DATA_NEEDED: driver output current] |
| Enable Pins | DE (driver enable) and /RE (receiver enable, active-low), separate pins | — |
| Short-Circuit Protection | Yes, driver outputs are short-circuit current limited | — |
| 열 차단 | Yes, protects against excessive power dissipation | — |
| Quiescent Current Shutdown Pin | Not present on this device | — |
| RoHS 상태 | Compliant (Maxim lead-free suffix '+') | — |
| Qualification | Industrial temperature option available in family - [DATA_NEEDED: AEC-Q100 status] | — |
| Communication Standards | — | RS-422 and RS-485 |
| Operating Mode | — | Half-duplex |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Power Class | — | Low-power |
| Driver Slew Rate | — | Slew-rate-limited |
| Logic Input | — | 1 data input |
| Logic Output | — | 1 data output |
| Differential Bus Inputs | — | 2 differential inputs: A and B |
| Package Type | — | 8-pin PDIP |
| 동작 온도 범위 | — | [DATA_NEEDED: operating temperature range] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |