MC3302P vs MC3302PG 비교
다음의 상세 나란히 비교: MC3302P 제조: onsemi 및 MC3302PG 제조: onsemi. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | MC3302P | MC3302PG |
|---|---|---|
| 브랜드 | onsemi | onsemi |
| 카테고리 | Amplifier ICs | Logic ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Comparator Type | Quad differential comparator | General Purpose |
| Number of Channels | 4 channels | — |
| Supply Configuration | Single supply | Single Supply |
| Maximum Supply Voltage | 30 V | — |
| Differential Input Voltage Range | ±15 V | — |
| Input Bias Current | 25 nA typical | — |
| Input Offset Current | ±5.0 nA typical | — |
| 출력 유형 | Open collector | Open Collector |
| 패키지 | PDIP-14, 14 pins | 14-PDIP |
| 실장 유형 | Through-hole | Through Hole |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supply Current per Channel | [DATA_NEEDED: supply current per channel] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Output Low-Level Voltage | [DATA_NEEDED: output low-level voltage] | — |
| Power Consumption | [DATA_NEEDED: power consumption] | — |
| RoHS 상태 | unknown | — |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | unknown | [DATA_NEEDED: AEC-Q100 qualification status] |
| Number of Comparators | — | 4 channels |
| Supply Voltage Range | — | 3 V to 36 V |
| Response Time | — | 1.3 us |
| 공급 전류 | — | 1 mA |
| Output Compatibility | — | CMOS, TTL |
| IC Output Type | — | CMOS, TTL |
| Package Type | — | PDIP |
| Package Pitch | — | 7.62 mm |
| Package Row Spacing | — | 0.300 inch |
| Temperature Grade | — | Commercial |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |