MC68340AB25E-FR vs MC68340FE25E 비교
다음의 상세 나란히 비교: MC68340AB25E-FR 제조: NXP Semiconductors 및 MC68340FE25E 제조: NXP Semiconductors. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | MC68340AB25E-FR | MC68340FE25E |
|---|---|---|
| 브랜드 | NXP Semiconductors | NXP Semiconductors |
| 카테고리 | Microcontrollers | Microcontrollers |
| 수명 주기 상태 | NRND | NRND |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $147.18 | $55.80 |
| Core Architecture | CPU32 (M68000-family, 32-bit internal / 16-bit external) | CPU32 (M68000-compatible, 32-bit CISC) |
| 최대 클록 주파수 | 25 MHz | 25 MHz |
| Performance | 4.8 MIPS | [DATA_NEEDED: MIPS rating, derived from cycle count per instruction] |
| External Data Bus Width | 16-bit | — |
| DMA Channels | 2 x 32-bit DMA | 2 x 32-bit full-duplex channels |
| Serial Communication Interfaces (SCI) | 2 | — |
| Timer Modules | 2 x 16-bit TIM | — |
| Parallel I/O | 8-bit port | Multi-function parallel port subsystem |
| Chip-Select Outputs | Up to 12 (from System Integration Module) | Multiple programmable chip-select lines |
| 패키지 | 144-pin QFP (FR suffix denotes T&R) | 144-pin CQFP (Ceramic Quad Flat Pack), 26.77 x 26.77 mm |
| 공급 전압 | 5 V | [DATA_NEEDED: VDD nominal, refer to datasheet Section 2] |
| 동작 온도 범위 | -40C to +85C (extended, 'E' suffix) | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance not in provided data] |
| 실장 유형 | Surface Mount | Surface Mount (ceramic CQFP) |
| Processor Series | M683xx | — |
| Instruction Set | CISC (M68000-family) | — |
| Internal Registers | 32-bit | — |
| Family Position | High-performance MPU with on-chip DMA and peripherals | — |
| Manufacturer | — | NXP Semiconductors (formerly Motorola/Freescale) |
| Part Number | — | MC68340FE25E |
| 데이터 버스 폭 | — | 16-bit external, 32-bit internal registers |
| Timers | — | 2 x 16-bit general-purpose timers |
| Serial Interface | — | 1 x UART (SCI) |
| DRAM Controller | — | Page-mode and nibble-mode DRAM support |
| 동작 온도 | — | Extended grade (E suffix) |
| Instruction Set Compatibility | — | M68000 user-object-code compatible |