MC9S08PT16VWJ vs MC9S08PA16VTJ 비교
다음의 상세 나란히 비교: MC9S08PT16VWJ 제조: NXP Semiconductors 및 MC9S08PA16VTJ 제조: NXP Semiconductors. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
NXP Semiconductors
MC9S08PT16VWJ - 8-bit S08 MCU, 16KB Flash, 20MHz, SOIC-20 | NXP
MC9S08PT16VWJ Nrnd
사양 비교
| 파라미터 | MC9S08PT16VWJ | MC9S08PA16VTJ |
|---|---|---|
| 브랜드 | NXP Semiconductors | NXP Semiconductors |
| 카테고리 | Microcontrollers | Microcontrollers |
| 수명 주기 상태 | NRND | NRND |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $1.89 | $1.18 |
| Core | S08 (8-bit) | — |
| Maximum Bus Frequency | 20 MHz | 20 MHz |
| Program Memory (Flash) | 16 KB (16K x 8) | 16 KB |
| Operating Voltage Range | 2.7 V to 5.5 V | — |
| 동작 온도 범위 | -40 °C to +105 °C (Industrial) | — |
| 패키지 | 20-SOIC (0.295 inch / 7.50 mm body width) | 20-pin TSSOP |
| 핀 수 | 20 | — |
| On-Chip Data Memory (RAM) | [DATA_NEEDED: RAM size] | — |
| On-Chip EEPROM | Yes (size per document) | — |
| Touch Sensing Interface (TSI) | Yes | — |
| FlexTimer (FTM) Modules | Yes (motor-control capable) | — |
| Interrupt Sources | Up to 40 | — |
| Nested Interrupt Levels | 4 | — |
| 실장 유형 | Surface Mount | Surface Mount (TSSOP) |
| 수명 주기 상태 | NRND (Not Recommended for New Designs) | — |
| Core Architecture | — | HCS08L (S08 family) |
| 데이터 버스 폭 | — | 8 bit |
| RAM | — | [DATA_NEEDED: RAM size in KB] |
| EEPROM (emulated) | — | Yes (in flash, configurable) |
| Supply Voltage (VDD) | — | 2.7 V to 5.5 V |
| 동작 온도 | — | -40 C to +105 C |
| I/O Pins | — | Up to 18 GPIO |
| ADC | — | On-chip SAR ADC (channel count [DATA_NEEDED: ADC channels]) |
| Analog Comparator | — | Yes |
| Timers | — | FlexTimer (PWM-capable, channel count [DATA_NEEDED: PWM channels]) |
| Interrupts | — | Up to 40 sources, 4-level nested |
| Low-Power Modes | — | Wait, Stop (low-power) |
| Debug Interface | — | BDM (Background Debug Mode) |
| Watchdog | — | COP watchdog |
| RoHS 상태 | — | Compliant |
| Lead-Free / MSL | — | Lead-free; MSL [DATA_NEEDED: MSL level] |
| Tube Packaging Standard Qty | — | Per tube (qty [DATA_NEEDED: tube qty]) |