MPX5100DP vs MPX5100AP 비교
다음의 상세 나란히 비교: MPX5100DP 제조: NXP Semiconductors 및 MPX5100AP 제조: NXP Semiconductors. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | MPX5100DP | MPX5100AP |
|---|---|---|
| 브랜드 | NXP Semiconductors | NXP Semiconductors |
| 카테고리 | Pressure Sensors | Pressure Sensors |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $12.03 | $12.03 |
| Pressure Type | Differential | Absolute |
| Operating Pressure Range | 0 kPa to 100 kPa (0 to 14.5 PSI) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | [DATA_NEEDED: maximum overload pressure] |
| Supply Voltage (Vcc) | 5 V (nominal) | — |
| 출력 전압 범위 | 0.2 V to 4.7 V (ratiometric, ~4.5 V span) | — |
| 출력 유형 | Analog, ratiometric to Vcc | Analog, ratiometric |
| Accuracy | ±2.5% (0 to 85 °C) | — |
| Sensitivity | 45 mV/kPa nominal | — |
| 동작 온도 | -40 °C to +125 °C | — |
| Response Bandwidth | 1 kHz (typical) | — |
| Port Configuration | Dual ports, male 0.19" (4.93 mm) tube, same side | — |
| 패키지 | 6-SIP Module (through-hole) | 6-SIP Module (Case 867B-04) |
| Signal Conditioning | On-chip amplifier, temperature compensation, calibration | — |
| Technology | Piezoresistive MEMS with bipolar ASIC | Piezoresistive MEMS with bipolar ASIC |
| 실장 유형 | Through-Hole (SIP) | Through-Hole (SIP) |
| RoHS 상태 | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| Lead-Free | [DATA_NEEDED: lead-free status] | — |
| Output Voltage Span | — | 0.2 V to 4.7 V at VCC = 5.0 V |
| Supply Voltage (VCC) | — | 5.0 V typical (4.75 V to 5.25 V) |
| 공급 전류 | — | 10 mA typical |
| Pressure Accuracy | — | +/- 2.5% (0 C to 85 C) |
| Temperature Compensated Range | — | 0 C to +85 C |
| 동작 온도 범위 | — | -40 C to +125 C |
| Response Time | — | 1 ms typical |
| Port Style | — | Axial port with 0.19 in (4.93 mm) tube |