MPX5100GP vs MPX5100DP 비교
다음의 상세 나란히 비교: MPX5100GP 제조: NXP Semiconductors 및 MPX5100DP 제조: NXP Semiconductors. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | MPX5100GP | MPX5100DP |
|---|---|---|
| 브랜드 | NXP Semiconductors | NXP Semiconductors |
| 카테고리 | Pressure Sensors | Pressure Sensors |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $12.03 | $12.03 |
| Pressure Type | Vented Gauge | Differential |
| Pressure Range | 0 kPa to 100 kPa (0 to 14.5 psi) | — |
| 동작 공급 전압 | 4.75 V to 5.25 V (5 V nominal) | — |
| 출력 전압 범위 | 0.2 V to 4.7 V | 0.2 V to 4.7 V (ratiometric, ~4.5 V span) |
| 공급 전류 | 7 mA to 10 mA typical | — |
| Full-Scale Span | 4.5 V typical | — |
| Accuracy | 2.5% over compensated range | ±2.5% (0 to 85 °C) |
| Port Configuration | Single axial port, 0.19" (4.93 mm) tube | Dual ports, male 0.19" (4.93 mm) tube, same side |
| 패키지 | 6-SIP Module (through-hole) | 6-SIP Module (through-hole) |
| Technology | Piezoresistive, monolithic silicon | Piezoresistive MEMS with bipolar ASIC |
| On-chip Signal Conditioning | Yes (temperature compensated, calibrated) | — |
| 동작 온도 | -40 C to +125 C | -40 °C to +125 °C |
| Compensated Temperature Range | 0 C to +85 C | — |
| Response Time | Low millisecond range | — |
| RoHS 상태 | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Operating Pressure Range | — | 0 kPa to 100 kPa (0 to 14.5 PSI) |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Supply Voltage (Vcc) | — | 5 V (nominal) |
| 출력 유형 | — | Analog, ratiometric to Vcc |
| Sensitivity | — | 45 mV/kPa nominal |
| Response Bandwidth | — | 1 kHz (typical) |
| Signal Conditioning | — | On-chip amplifier, temperature compensation, calibration |
| 실장 유형 | — | Through-Hole (SIP) |
| Lead-Free | — | [DATA_NEEDED: lead-free status] |