MPXA4250AC6T1 vs MPXA4250AC6U 비교
다음의 상세 나란히 비교: MPXA4250AC6T1 제조: NXP Semiconductors 및 MPXA4250AC6U 제조: NXP Semiconductors. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | MPXA4250AC6T1 | MPXA4250AC6U |
|---|---|---|
| 브랜드 | NXP Semiconductors | NXP Semiconductors |
| 카테고리 | Pressure Sensors | Pressure Sensors |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $5.88 | $9.40 |
| Pressure Type | Absolute (MAP) | Absolute (Manifold Absolute Pressure - MAP) |
| Operating Pressure Range | 20 kPa to 250 kPa (2.9 PSI to 36.26 PSI) | 20 kPa to 250 kPa (2.9 PSI to 36.26 PSI) |
| 출력 전압 범위 | 0.2 V to 4.9 V | — |
| 공급 전압 | 4.85 V to 5.35 V (5 V typical) | — |
| 출력 유형 | Analog, ratiometric | Analog, ratiometric to Vcc |
| Accuracy | [DATA_NEEDED: accuracy %FS] | — |
| 동작 온도 | -40 C to +125 C | -40C to +125C |
| 패키지 | 8-SMD, Gull Wing, Top Port | — |
| Port Size | 0.13 in (3.17 mm) Tube, Top Side | — |
| 실장 유형 | Surface Mount | — |
| Termination Style | PCB (Gull Wing) | — |
| Pressure Port Style | Top Port, Vertical Manifold Tap | — |
| Sensor Technology | Piezoresistive (Wheatstone bridge, on-chip amplifier) | — |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| RoHS 상태 | Compliant | [DATA_NEEDED: RoHS status] |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Sensitivity | — | 20 mV/kPa (typical) |
| Analog Output Voltage | — | 0.2 V to 4.9 V (approximately, proportional to pressure) |
| Supply Voltage (Vcc) | — | 4.85 V to 5.35 V |
| 공급 전류 | — | [DATA_NEEDED: supply current] |
| Storage Temperature | — | [DATA_NEEDED: storage temperature] |
| Port Configuration | — | Top port, male tube - 0.13 inch (3.17 mm) |
| Package Type | — | 8-SMD, Gull Wing, Top Port |
| 장착 스타일 | — | Surface Mount (PCB) |
| On-chip Calibration | — | Yes (laser-trimmed, temperature compensated) |
| Signal Conditioning | — | Integrated on-chip |
| Automotive Grade | — | Engine control / MAP application qualified (per datasheet family) |