MPXHZ6250AC6T1 vs MPXH6250AC6T1 비교
다음의 상세 나란히 비교: MPXHZ6250AC6T1 제조: STMicroelectronics 및 MPXH6250AC6T1 제조: STMicroelectronics. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
STMicroelectronics
MPXHZ6250AC6T1 - 20-250kPa Absolute Pressure Sensor | STMicroelectronics
MPXHZ6250AC6T1 ✓ 활성STMicroelectronics
MPXH6250AC6T1 - 20-250kPa Absolute Pressure Sensor | STMicroelectronics
MPXH6250AC6T1 ✓ 활성사양 비교
| 파라미터 | MPXHZ6250AC6T1 | MPXH6250AC6T1 |
|---|---|---|
| 브랜드 | STMicroelectronics | STMicroelectronics |
| 카테고리 | Pressure Sensors | Pressure Sensors |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $7.10 | $5.95 |
| Pressure Type | Absolute | — |
| Operating Pressure Range | 20 kPa to 250 kPa (2.9 PSI to 36.26 PSI) | — |
| Sensitivity | 20.4 mV/kPa | — |
| 출력 유형 | Analog Voltage | Analog Voltage, Ratiometric |
| 출력 전압 범위 | 0.3 V to 4.9 V | 0.3 V to 4.9 V |
| Accuracy | ±1.5 %FS | Calibrated on-chip with temperature compensation |
| 공급 전압 | 5 V (typical, ratiometric) | 5.0 V typical |
| 동작 온도 범위 | -40 °C to +125 °C | — |
| 패키지 | 8-SOIC (0.335", 8.50 mm Width), Top Port | — |
| Port Type | Male - 0.13" (3.3 mm) Tube, Top Axial | — |
| Pressure Port Orientation | Top | — |
| Technology | Piezoresistive MEMS with on-chip signal conditioning | Piezoresistive MEMS with integrated CMOS signal conditioning |
| 실장 유형 | Surface Mount | Surface Mount |
| Media Compatibility | Media resistant (top-side port) | — |
| Temperature Compensation | On-chip, calibrated -40 °C to +125 °C | — |
| RoHS 상태 | Compliant | Compliant |
| Manufacturer | — | STMicroelectronics (formerly Freescale / NXP) |
| Series | — | MPXH6250A |
| 센서 유형 | — | Absolute Pressure Sensor |
| Pressure Range | — | 20 kPa to 250 kPa (2.9 PSI to 36.26 PSI) |
| Pressure Port | — | Top-side male tube, 3.3 mm (0.13") diameter |
| Port Style | — | Vertical / top-mounted with integrated tube |
| 패키지 / 케이스 | — | 8-SOIC (0.335", 8.50 mm width), Top Port |
| 동작 온도 | — | -40C to +125C |
| Response Time | — | 1 ms typical |
| Lead Free | — | Yes |
| Maximum Overpressure | — | [DATA_NEEDED: maximum overpressure spec] |