MPXV5100GC6U vs MPX5100GP 비교

다음의 상세 나란히 비교: MPXV5100GC6U 제조: NXP Semiconductors 및 MPX5100GP 제조: NXP Semiconductors. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

NXP Semiconductors
MPXV5100GC6U MPXV5100GC6U - 100kPa Vented Gauge Pressure Sensor | NXP

MPXV5100GC6U - 100kPa Vented Gauge Pressure Sensor | NXP

MPXV5100GC6U ✓ 활성
NXP Semiconductors
MPX5100GP MPX5100GP - 0-100 kPa Gauge Pressure Sensor | NXP

MPX5100GP - 0-100 kPa Gauge Pressure Sensor | NXP

MPX5100GP ✓ 활성

사양 비교

파라미터 MPXV5100GC6U MPX5100GP
브랜드 NXP Semiconductors NXP Semiconductors
카테고리 Pressure Sensors Pressure Sensors
수명 주기 상태 활성 활성
재고 상태 In Stock In Stock
단가 (USD) $11.05 $12.03
Manufacturer NXP Semiconductors (formerly Freescale, Motorola) —
센서 유형 Pressure Sensor, Vented Gauge —
Operating Pressure Range 0 kPa to 100 kPa (0 PSI to 14.5 PSI) —
Pressure Type Vented Gauge Vented Gauge
Accuracy 2.5 % of Full-Scale Span (typ.) 2.5% over compensated range
출력 유형 Analog, Ratiometric Voltage —
출력 전압 범위 0.2 V to 4.7 V (at 5 V supply) 0.2 V to 4.7 V
Supply Voltage (VCC) 4.75 V to 5.25 V —
공급 전류 [DATA_NEEDED: supply current typ.] 7 mA to 10 mA typical
Response Time 1.0 ms (typical) Low millisecond range
동작 온도 범위 0 °C to +85 °C —
Storage Temperature Range [DATA_NEEDED: storage temperature range] —
Port Style Top port, male 0.13" (3.17 mm) tube —
패키지 / 케이스 8-SMD, Gull Wing, Top Port (SOP-8 derived) —
실장 유형 Surface Mount —
Output Sensitivity 45 mV/kPa (typical) —
Pressure Reference Atmospheric vent (vented gauge) —
On-chip Signal Conditioning Yes (temperature compensated, calibrated) Yes (temperature compensated, calibrated)
RoHS 상태 [DATA_NEEDED: RoHS compliance status] Compliant
Pressure Range — 0 kPa to 100 kPa (0 to 14.5 psi)
동작 공급 전압 — 4.75 V to 5.25 V (5 V nominal)
Full-Scale Span — 4.5 V typical
Port Configuration — Single axial port, 0.19" (4.93 mm) tube
패키지 — 6-SIP Module (through-hole)
Technology — Piezoresistive, monolithic silicon
동작 온도 — -40 C to +125 C
Compensated Temperature Range — 0 C to +85 C

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청