MSP430G2553IPW28 vs MSP430F423IPM 비교
다음의 상세 나란히 비교: MSP430G2553IPW28 제조: Texas Instruments 및 MSP430F423IPM 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
MSP430G2553IPW28 - 16MHz 16KB Flash MCU | Texas Instruments (Tape & Reel)
MSP430G2553IPW28 ✓ 활성Texas Instruments
MSP430F423IPM - 8MHz 16-Bit MCU with 3 ADCs | Texas Instruments
MSP430F423IPM ✓ 활성사양 비교
| 파라미터 | MSP430G2553IPW28 | MSP430F423IPM |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Microcontrollers | Microcontrollers |
| 수명 주기 상태 | 활성 | 활성 |
| Core Processor | MSP430 CPU16 | — |
| Core Size | 16-Bit | — |
| Speed | 16 MHz | — |
| Program Memory Size | 16KB (16K x 8) | — |
| RAM Size | 512 x 8 | — |
| Number of I/O | 16 | — |
| 패키지 / 케이스 | 28-TSSOP (0.173, 4.40mm Width) | — |
| Oscillator Type | Internal | — |
| Supply Voltage Range | 1.8V to 3.6V | 2.7 V to 3.6 V |
| 동작 온도 | -40 C to +85 C | — |
| ADC Resolution | 10-bit | 16-bit |
| ADC Channels | [DATA_NEEDED: ADC channels] | — |
| Timer Count | 2 x 16-bit | — |
| Communication Interfaces | UART, SPI, I2C | — |
| Low-Power Modes | 5 (LPM0 to LPM4) | — |
| Standby Current | 0.1 uA (Off Mode with RAM retention) | — |
| Brownout Reset | Yes | — |
| Temperature Sensor | Yes | — |
| Capacitive Touch I/O | Yes | — |
| DCO Accuracy | Approximately 1% (factory calibrated) | — |
| Packaging Type | Tape & Reel | — |
| Product Type | — | 16-bit mixed-signal microcontroller |
| Maximum Clock Speed | — | 8 MHz |
| CPU Architecture | — | 16-bit RISC |
| Instruction Cycle Time | — | 125 ns |
| Flash Memory | — | 8 KB |
| RAM | — | 256 B |
| ADC Count | — | 3 |
| ADC Type | — | Sigma-delta |
| LCD Support | — | 128-segment LCD |
| I/O Ports | — | 48 |
| Operating Range | — | Industrial |
| Power-Saving Modes | — | 5 |
| Standby Wake-Up Time | — | Less than 6 microseconds |
| Frequency-Locked Loop | — | FLL+ |
| 패키지 | — | 64-LQFP (10x10 mm) |
| 실장 유형 | — | Surface mount |
| 수명 주기 상태 | — | Active |