NE5532AN vs NE5532P 비교
다음의 상세 나란히 비교: NE5532AN 제조: onsemi 및 NE5532P 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | NE5532AN | NE5532P |
|---|---|---|
| 브랜드 | onsemi | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Dual low-noise operational amplifier | Dual low-noise operational amplifier |
| Amplifier Count | 2 amplifiers | 2 amplifiers |
| Compensation | Internally compensated | — |
| Gain-Bandwidth Product | 10 MHz | — |
| Supported Supply Voltage | ±5 V to ±15 V | — |
| NE5532x Commercial Temperature Range | 0°C to 70°C | — |
| SA5532x Industrial Temperature Range | -40°C to +85°C | — |
| 패키지 | 8-DIP, 0.300 inch (7.62 mm) | 8-pin PDIP (P) |
| 실장 유형 | Through-hole | Through hole |
| Input Noise Density | [DATA_NEEDED: input noise density] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 4000 µV maximum |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 9 V/µs typical |
| Total Harmonic Distortion | [DATA_NEEDED: total harmonic distortion] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Maximum Supply Voltage | — | 30 V |
| Supply Voltage Range | — | ±5 V to ±15 V |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz typical at 1 kHz |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| High DC Voltage Gain | — | 100 V/mV typical |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical with VCC = ±18 V and RL = 600 ohm |
| Process Technology | — | Bipolar |
| 동작 온도 | — | 0 °C to 70 °C |
| Primary Application | — | Audio |