NE5532ANG vs NE5532N 비교
다음의 상세 나란히 비교: NE5532ANG 제조: onsemi 및 NE5532N 제조: onsemi. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | NE5532ANG | NE5532N |
|---|---|---|
| 브랜드 | onsemi | onsemi |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | Unknown |
| Amplifier Type | Dual internally compensated operational amplifier | General Purpose |
| Number of Amplifier Circuits | 2 circuits | — |
| 동작 공급 전압 | 3 V to 20 V | — |
| 패키지 | 8-pin PDIP | 8-PDIP (0.300 in, 7.62 mm) |
| Total Pin Count | 8 pins | — |
| 실장 유형 | Through-hole | — |
| Noise Classification | Low-noise operational amplifier | — |
| Compensation | Internal | Internal frequency compensation |
| Primary Application Category | Audio and instrumentation amplification | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Unity-Gain Bandwidth | [DATA_NEEDED: unity-gain bandwidth] | — |
| Input Noise Voltage Density | [DATA_NEEDED: input noise voltage density] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Slew Rate | [DATA_NEEDED: slew rate] | 9 V/µs |
| Output Current Capability | [DATA_NEEDED: output current capability] | — |
| Short-Circuit Protection | [DATA_NEEDED: short-circuit protection] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Product Type | — | Dual internally compensated operational amplifier |
| Number of Circuits | — | 2 |
| Packaging | — | Tube |
| Gain Bandwidth Product | — | 10 MHz |
| Noise Performance | — | Low noise |
| Output Drive | — | Improved output-drive capability |
| Small-Signal Bandwidth | — | High small-signal bandwidth |
| Power Bandwidth | — | High power bandwidth |
| 장착 스타일 | — | Through-hole |
| 공급 전압 | — | [DATA_NEEDED: supply voltage] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Output Current | — | [DATA_NEEDED: output current] |