NE5534ADRE4 vs NE5534ADR2 비교
다음의 상세 나란히 비교: NE5534ADRE4 제조: Texas Instruments 및 NE5534ADR2 제조: onsemi. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | NE5534ADRE4 | NE5534ADR2 |
|---|---|---|
| 브랜드 | Texas Instruments | onsemi |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Amplifier Type | Single general-purpose operational amplifier | General Purpose |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typical |
| Input Noise Density | 3.5 nV/√Hz typical | — |
| DC Voltage Gain | 100 dB typical | — |
| Open-Loop Gain | 100 V/mV typical | — |
| Slew Rate | 13 V/ms typical | 13 V/µs typical |
| Peak-to-Peak Output Swing | 32 V typical at VCC+ = +18 V and RL = 600 Ω | — |
| Supply Voltage Range | +3 V to +20 V | [DATA_NEEDED: supply voltage range] |
| Total Supply Current | 38 mA per channel | — |
| Input Bias Current | 500 nA typical | [DATA_NEEDED: input bias current] |
| Common-Mode Rejection Ratio | 10 dB typical as shown in source snippet | 100 dB typical |
| Offset Nulling | Supported | — |
| External Compensation | Supported | — |
| 패키지 | 8-SOIC (0.154 inch, 3.90 mm width) | 8-SOIC, 0.154 inch width, 3.90 mm width |
| 핀 수 | 8 pins | — |
| 실장 유형 | Surface mount | Surface mount |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Number of Circuits | — | 1 circuit |
| 토폴로지 | — | Single operational amplifier |
| Input Voltage Noise Density | — | 3.5 nV/√Hz typical |
| Gain-Bandwidth Product | — | 10 MHz typical |
| High DC Voltage Gain | — | 100 V/mV typical |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical at VCC+ +18 V and 600 W |
| Packaging | — | Tape and reel |
| Product Description | — | Single high-performance low-noise operational amplifier |
| Manufacturer | — | onsemi |
| Offset Voltage | — | [DATA_NEEDED: input offset voltage] |