OPA134PA vs OPA130PA 비교
다음의 상세 나란히 비교: OPA134PA 제조: Texas Instruments 및 OPA130PA 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | OPA134PA | OPA130PA |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Operational Amplifier Type | Single high-performance audio operational amplifier | — |
| Channel Count | 1 circuit | — |
| Gain-Bandwidth Product | 8 MHz | 1 MHz |
| Input Bias Current | 50 pA | 20 pA maximum |
| Input Noise Density | 8 nV/√Hz | — |
| Total Harmonic Distortion | 0.00008% | — |
| Slew Rate | 20 V/µs | [DATA_NEEDED: slew rate] |
| Open-Loop Gain | 600 | 120 dB minimum |
| Supply Voltage Range | ±18 V | 4.5 V to 36 V |
| Input Stage | True FET input | — |
| Product Family | SoundPlus high-performance audio operational amplifier | — |
| 패키지 | 8-pin PDIP | 8-pin PDIP, 0.300 inch body width |
| 실장 유형 | Through-hole | Through-hole |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Power-Supply Rejection Ratio | [DATA_NEEDED: power-supply rejection ratio] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | 90 dB minimum |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | Not applicable |
| Amplifier Type | — | Single operational amplifier |
| Input Topology | — | FET input |
| 대기 전류 | — | 530 uA typical per amplifier |
| Input Offset Voltage | — | 1 mV maximum |
| Total Supply Voltage Range | — | 4.5 V to 36 V |
| Dual-Supply Operating Range | — | +/-18 V |
| 핀 수 | — | 8 |
| Low Offset Voltage | — | 1 mV maximum |
| High Open-Loop Gain | — | 120 dB minimum |
| Excellent Bandwidth | — | 1 MHz |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |