OPA642PB vs OPA640P 비교
다음의 상세 나란히 비교: OPA642PB 제조: Texas Instruments 및 OPA640P 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | OPA642PB | OPA640P |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Wideband, low-distortion, low-gain operational amplifier | Voltage-feedback operational amplifier |
| Amplifier Architecture | Single voltage-feedback operational amplifier | — |
| Supply Voltage Range | ±4.5 V to ±5.5 V | — |
| Single Supply Equivalent Range | 9 V to 11 V | — |
| Stated Gain Figure | 90 dB | — |
| Operating Current | 25 uA | — |
| 대기 전류 | 70 uA | — |
| Number of Circuits | 1 circuit | 1 circuit |
| 핀 수 | 8 pins | — |
| 패키지 | 8-pin PDIP, 0.300 inch (7.62 mm) pitch | 8-pin PDIP |
| Terminal Type | Through-hole | — |
| Package Shape | Rectangular | — |
| Temperature Grade | Industrial | Industrial |
| Output Current | [DATA_NEEDED: output current] | — |
| Gain Bandwidth Product | [DATA_NEEDED: gain bandwidth product] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 350 V/µs |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | [DATA_NEEDED: output voltage swing] |
| Noise Voltage Density | [DATA_NEEDED: input noise voltage density] | — |
| Total Harmonic Distortion | [DATA_NEEDED: total harmonic distortion] | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| Unity-Gain Bandwidth | — | 1.3 GHz |
| Unity-Gain Stability | — | Unity-gain stable |
| Input Voltage Noise Density | — | 2.9 nV/√Hz |
| Common-Mode Rejection Ratio | — | 85 dB |
| Low-Harmonic-Distortion Frequency | — | 10 MHz |
| Package Technology | — | Through-hole DIP |
| Package Width | — | 0.300 in (7.62 mm) |
| Number of Terminals | — | 8 terminals |
| Operating Voltage Range | — | [DATA_NEEDED: operating voltage range] |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input voltage range] |
| 실장 유형 | — | Through-hole |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |