OPA643P vs NE5532P 비교

다음의 상세 나란히 비교: OPA643P 제조: Texas Instruments 및 NE5532P 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Texas Instruments
NE5532P NE5532P - Dual 10 MHz Low-Noise Op Amp | Texas Instruments

NE5532P - Dual 10 MHz Low-Noise Op Amp | Texas Instruments

NE5532P ✓ 활성

사양 비교

파라미터 OPA643P NE5532P
브랜드 Texas Instruments Texas Instruments
카테고리 Amplifier ICs Amplifier ICs
수명 주기 상태 활성 활성
재고 상태 In Stock In Stock
단가 (USD) $3.75 $0.00
Manufacturer Texas Instruments (Burr-Brown) —
Amplifier Type Voltage Feedback —
Number of Channels 1 —
Gain-Bandwidth Product (GBP) 800 MHz —
Slew Rate 1000 V/µs 9 V/µs typical
Input Voltage Noise Density 2.3 nV/√Hz —
Low Distortion (specified at) 5 MHz —
Stable for Closed-Loop Gains ≥ 3 —
Supply Voltage Range ±5.5 V (max); ±5 V typical ±5 V to ±15 V
Supply Current (typ) [DATA_NEEDED: quiescent supply current] —
Input Offset Voltage [DATA_NEEDED: input offset voltage] 4000 µV maximum
동작 온도 범위 -40 °C to +85 °C —
패키지 8-pin PDIP (P) 8-pin PDIP (P)
실장 유형 Through-Hole Through hole
RoHS 상태 Compliant (Pb-free variants available) [DATA_NEEDED: RoHS status]
Datasheet Publication 1998-04-27 (Burr-Brown original) —
Amplifier Count — 2 amplifiers
Product Type — Dual low-noise operational amplifier
Maximum Supply Voltage — 30 V
Unity-Gain Bandwidth — 10 MHz typical
Equivalent Input Noise Voltage — 5 nV/√Hz typical at 1 kHz
Common-Mode Rejection Ratio — 100 dB typical
High DC Voltage Gain — 100 V/mV typical
Peak-to-Peak Output Voltage Swing — 32 V typical with VCC = ±18 V and RL = 600 ohm
Process Technology — Bipolar
동작 온도 — 0 °C to 70 °C
Primary Application — Audio
REACH Status — [DATA_NEEDED: REACH status]

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청