PCA9500PW vs PCA9534PW 비교
다음의 상세 나란히 비교: PCA9500PW 제조: NXP Semiconductors 및 PCA9534PW 제조: NXP Semiconductors. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | PCA9500PW | PCA9534PW |
|---|---|---|
| 브랜드 | NXP Semiconductors | NXP Semiconductors |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | 8-bit I2C-bus and SMBus I/O port expander with EEPROM | — |
| Number of I/O Pins | 8 pins | — |
| I/O Direction Control | Independent input or output configuration per pin | — |
| I/O Port Type | Quasi-bidirectional | — |
| Integrated EEPROM Capacity | 2 kbit | — |
| Bus Interface | I2C-bus and SMBus | — |
| Maximum Bus Frequency | 400 kHz | — |
| Supply Voltage Range | 2.5 V to 3.6 V | 2.3 V to 5.5 V |
| 동작 온도 범위 | -40 °C to +85 °C | — |
| Hardware Address Inputs | 3 address pins | — |
| Maximum Devices on One Bus | 8 devices | — |
| 패키지 | 16-pin TSSOP | 16-pin TSSOP |
| 실장 유형 | Surface mount | Surface Mount |
| GPIO and EEPROM Addressing | Two separate devices visible to the bus master | — |
| Reference Interface | PCF8574-compatible configuration method | — |
| RoHS Compliance | [DATA_NEEDED: verified RoHS status] | — |
| REACH Compliance | [DATA_NEEDED: verified REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Device Type | — | 8-bit CMOS I2C-bus and SMBus low-power I/O port expander |
| Number of GPIO Pins | — | 8 |
| I2C Bus Frequency | — | 400 kHz |
| 인터페이스 | — | I2C-bus and SMBus |
| Interrupt Output | — | Yes |
| Configuration Registers | — | Yes |
| Address Configuration Pins | — | A0, A1, and A2 |
| Maximum Devices Sharing Bus | — | 8 devices per manufacturer data |
| Internal I/O Pull-up Resistors | — | Removed |
| 핀 수 | — | 16 pins |
| PCF8574 Compatibility | — | Pin-to-pin and I2C address compatible; software changes required |
| Manufacturer | — | NXP Semiconductors |
| 수명 주기 상태 | — | Active |
| 동작 온도 | — | [DATA_NEEDED: operating temperature range] |
| RoHS 상태 | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |