PCA9539PW vs TCA9539PWR 비교
다음의 상세 나란히 비교: PCA9539PW 제조: NXP Semiconductors 및 TCA9539PWR 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | PCA9539PW | TCA9539PWR |
|---|---|---|
| 브랜드 | NXP Semiconductors | Texas Instruments |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | 16-bit general-purpose I/O expander | 16-bit I2C and SMBus low-power I/O expander |
| 인터페이스 | I2C/SMBus | — |
| Number of I/O Lines | 16 | 16 |
| Supply Voltage Range | 2.3 V to 5.5 V | — |
| Maximum Bus Frequency | 400 kHz | — |
| Interrupt Support | Yes | — |
| Reset Support | Yes | — |
| 출력 구성 | Push-pull output | — |
| Device Classification | CMOS interface IC | — |
| 패키지 | 24-pin TSSOP | 24-pin TSSOP (PW) |
| 실장 유형 | Surface mount | Surface mount |
| Host Compatibility | Microcontrollers and other I2C/SMBus hosts | — |
| I/O Mode | Input or general-purpose output | — |
| Address Configuration | Configurable registers; details require datasheet verification | — |
| 동작 온도 | [DATA_NEEDED: operating temperature range] | — |
| ESD/HBM Compliance | [DATA_NEEDED: ESD/HBM rating] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 status] | — |
| Pinout | [DATA_NEEDED: complete manufacturer pinout] | — |
| Operating Supply Voltage Range | — | 1.65 V to 5.5 V |
| Maximum I2C Clock Frequency | — | 400 kHz |
| Serial Interface | — | I2C and SMBus |
| Address Inputs | — | A0 and A1 hardware-selectable inputs |
| Maximum Devices per I2C Bus | — | 4 |
| Interrupt Output | — | Yes |
| Reset Input | — | Yes |
| Configuration Registers | — | Yes |
| Power-On Reset | — | Yes |
| Port Operation | — | Input, output, or mixed-direction operation |
| Number of Supply Pins | — | 2 |
| 동작 온도 범위 | — | [DATA_NEEDED: operating temperature range] |
| 대기 전류 | — | [DATA_NEEDED: quiescent current] |
| Input/Output Current per Line | — | [DATA_NEEDED: input/output current per line] |
| I2C Address | — | [DATA_NEEDED: I2C slave address] |