PCA9554ABS3,118 vs PCA9554U 비교
다음의 상세 나란히 비교: PCA9554ABS3,118 제조: NXP Semiconductors 및 PCA9554U 제조: NXP Semiconductors. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
NXP Semiconductors
PCA9554ABS3,118 - 8-bit I2C/SMBus GPIO Expander w/ Interrupt | NXP
PCA9554ABS3,118 ✓ 활성사양 비교
| 파라미터 | PCA9554ABS3,118 | PCA9554U |
|---|---|---|
| 브랜드 | NXP Semiconductors | NXP Semiconductors |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Interface Bus | I2C, SMBus | — |
| Number of I/O | 8 | — |
| Clock Frequency (Max) | 400 kHz | — |
| 공급 전압 | 2.3 V to 5.5 V | — |
| I/O Voltage Tolerance | 5.5 V | — |
| I2C Address Selection | 3 hardware address pins (up to 8 devices) | — |
| Interrupt Output | /INT, open-drain | 1 active-low interrupt output |
| Default I2C Address (PCA9554A) | 0x38 (3-bit addr 000 = 0x38) | — |
| I/O Direction Configurability | Per-bit input or output | — |
| Internal Pull-ups | Configurable weak pull-ups per pin | — |
| Power-On Reset | Yes (all ports initialized as inputs) | — |
| 동작 온도 | -40 C to +85 C | — |
| 패키지 | 16-HVQFN (3x3 mm) with exposed pad | — |
| 실장 유형 | Surface Mount | — |
| RoHS 상태 | Compliant | [DATA_NEEDED: RoHS status] |
| MSL 레벨 | [DATA_NEEDED: MSL rating] | — |
| Device Type | — | 8-bit I2C-bus and SMBus I/O port with interrupt |
| Number of I/O Pins | — | 8 pins |
| Number of Address Inputs | — | 3 inputs (A0, A1, A2) |
| Maximum Devices per Bus | — | 8 devices |
| Operating Voltage Range | — | 2.3 V to 5.5 V |
| Bus Interface | — | I2C and SMBus |
| Maximum I2C Clock Frequency | — | 400 kHz |
| Logic Technology | — | CMOS |
| Register Count | — | 4 registers (configuration, input, output, and polarity inversion) |
| Power-On I/O Configuration | — | Inputs with weak pull-up |
| Input Polarity Control | — | Configurable active-high or active-low inversion |
| Package Pin Count | — | 16 pins |
| Package Type | — | 16-pin SOIC, surface mount |
| PCF8574 Compatibility | — | Pin-to-pin and I2C-address compatible; software changes required |
| Application Note | — | AN469 |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |