SI2457-C-FT vs SI2434-D-FS 비교
다음의 상세 나란히 비교: SI2457-C-FT 제조: Skyworks Solutions 및 SI2434-D-FS 제조: Skyworks Solutions. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | SI2457-C-FT | SI2434-D-FS |
|---|---|---|
| 브랜드 | Skyworks Solutions | Skyworks Solutions |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Device Type | Modem IC | — |
| Maximum Data Rate | 56 kbps | 33.6 kbps |
| 공급 전압 | 3 V to 3.6 V | 3 V to 3.6 V |
| Nominal Supply Voltage | 3.3 V | — |
| 공급 전류 | 26 mA | — |
| 동작 온도 | 0 °C to 70 °C | — |
| 패키지 | 24-pin TSSOP | 16-SOIC, 0.154 in (3.90 mm) width |
| Terminal Count | 24 | — |
| 장착 스타일 | Surface mount | — |
| Terminal Form | Gull wing | — |
| Supported ITU-T Modem Formats | V.21, V.22, V.23, V.32, V.34, V.90 | — |
| Supported Bell Modem Formats | Bell 103 and Bell 212A | — |
| Error Correction | V.42bis | — |
| Rate Negotiation | MNP2-5 automatic rate negotiation | — |
| Capacitive Isolation | More than 6000 V | — |
| Telephone-Line Detection | Parallel phone detect | — |
| Tone Detection | DTMF detection | — |
| Clocking Feature | Built-in phase-locked loop | — |
| Temperature Grade | Commercial | — |
| RoHS 상태 | Compliant | RoHS compliant |
| Line Interface | Integrated DAA | — |
| Minimum Bit Rate | 300 bps | — |
| Fast Connect Support | Supported | — |
| Pinout | [DATA_NEEDED: complete numbered pin descriptions] | — |
| Absolute Maximum Ratings | [DATA_NEEDED: absolute maximum input, output, and supply ratings] | — |
| Product Type | — | ISOMODEM system-side interface IC |
| Supported Modulation | — | V.21, V.22, V.23, V.29, V.32 |
| Bell Support | — | Bell 103 and Bell 212A |
| 실장 유형 | — | Surface mount |
| 핀 수 | — | 16 pins |
| Telephone Line Architecture | — | Direct access arrangement (DAA) modem interface |
| Line-Side Companion | — | Si3018 or Si3010 family device |
| Lead-Free Status | — | Lead free |
| 동작 온도 범위 | — | [DATA_NEEDED: operating temperature range] |
| Maximum Input Voltage | — | [DATA_NEEDED: maximum input voltage] |
| Interface Standards | — | ITU-T V.21, V.22, V.23, V.29, V.32 and Bell 103, 212A |
| Clock Requirement | — | [DATA_NEEDED: clock and crystal requirements] |
| Shutdown or Power Control | — | [DATA_NEEDED: power-control features] |
| External Component Requirements | — | [DATA_NEEDED: external component list] |
| Qualification Standard | — | [DATA_NEEDED: automotive or industrial qualification status] |